■Prior to using this appliance, please read the user’smanual thoroughly, even in cases where you have previously familiarised yourself with the operation of similar types of
appliances. Only use the appliance in the manner described in this user’smanual. Keep this user’smanual in asafe place where it can be easily retrieved for future use.
■We recommend saving the original cardboard box, packaging material, purchase receipt and responsibility statement of the vendor or warranty card for at least the duration of
the legal liability for unsatisfactory performance or quality. In the event of transportation, we recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Power indicator light
A2 Temperature control knob
A3 Turn switch for starting just the fan,
for setting the power level 1 or 2
and for turning off the appliance.
A4 Air outlet grill
A5 Fan and heating elements
These parts are hidden underneath the grill.
A6 Integrated carry handle
(not shown)
it is located at the rear of the appliance.
A7 Air inlet grill
(not shown)
it is located at the rear of the appliance.
A8 Oscillation toggle switch
OPERATING THE APPLIANCE
■Before first use, remove all packaging materials including promotional stickers and labels from the appliance.
■Locate the appliance in asuitable location in accordance with the safety instructions. Make sure that the inflow or outflow vents A7 or A4 are not blocked, that the temperature
control knob A2 is set to minimum and the switch A3 is in position 0 (off). Connect the appliance to apower socket. After connecting the appliance to apower socket, indicator
light A1 will be lit.
1. SETTING AN OPERATING MODE
■Set the temperature control knob A2 to maximum and select the desired operating mode using switch A3.
Setting switch A3Description of operating mode
0Off
Air ventilation without heating. Only the fan is running. Heating elements are turned off.
1Power is set to alow level (1 000 W). The fan and one of the two heating elements are running.
The heating element heats the air and the fan ensures its flow into the room.
2Power is set to ahigh level (2 000 W). The fan and both the heating elements are running. The heating elements heat the air and the fan
ensures its flow into the room.
Note:
Upon first use or after it has not been used for an extended period of time, aslight odour may be sensed from the appliance. This is completely normal and will quickly
disappear.
2. TEMPERATURE CONTROL KNOB SETTING
■The appliance is equipped with athermostat that serves to maintain the desired temperature in the room.
■To heat up the air in the room as fast as possible, set switch A3 to the high power level and the temperature control knob A2 to maximum. When the desired temperature has
been reached, slowly turn the temperature control knob A2 anticlockwise until you hear aclick. The set thermostat will automatically switch the fan and heating elements A5 on
and off to maintain the desired temperature.
3. OSCILLATION FUNCTION
■Setting the switch A8 to position Iwill turn on the oscillation function. The hot air fan heater will automatically turn from side to side. To turn off oscillation, set the switch A8 to
position 0. This function is only available on model SFH 7057WH.
4. TURNING OFF
■When you have finished using it, turn off the oscillation function (only on model SFH 7057WH), set the temperature control knob A2 to minimum, set switch A3 to position 0 (off)
and disconnect the power cord from the power socket. After disconnecting the appliance from the power socket, indicator light A1 will turn off. Allow the appliance to cool down.
AUTOMATIC SHUT-OFF FUNCTION
■The appliance is equipped with asafety mechanism that automatically turns it off when it is accidentally knocked over. After returning the appliance back to the operating
position, it will start running again. We recommend waiting 5 - 10 minutes before the appliance cools down.
THERMAL PROTECTION
■The appliance is equipped with athermal fuse that turns it off upon overheating. Should such asituation occur, turn the appliance off and disconnect it from the power socket.
Make sure that the air inlet and outlet openings A7 or A4 are not blocked. Allow the appliance to cool down before attempting to put it back into operation as this will give the
thermal fuse time to reset.
■If you are unable to put the appliance back into operation, contact an authorised service centre.
CLEANING AND MAINTENANCE
■Before cleaning it, make sure that the appliance is turned off and disconnected from the power socket. If the surface of the appliance is hot, allow it to cool down.
■Use adry or lightly dampened wiping cloth to clean the surface of the appliance. Then thoroughly wipe everything dry. Dust that has settled inside the appliance can be
vacuumed out using avacuum cleaner through the air inlet and outlet grills A7 and A4.
■For cleaning, do not use cleaning products with an abrasive effect, solvents, etc. Otherwise, outer surface of the appliance may be damaged. Do not submerge the appliance or
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Sencor SFH 7017 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Sencor SFH 7017 in the language / languages: English as an attachment in your email.
The manual is 0,43 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
