760089
16
Zoom out
Zoom in
Previous page
1/104
Next page
16 - EN
You can then edit the displayed data, if you want. Input the new value and then press the =
key to replace the old value with the new one. This also means that if you want to perform
some other operation (calculation, recall of statistical calculation results, etc.), you should
always press the AC key first to exit data display.
Pressing the DT key Instead of = after changing a value on the display registers the value
you input as a new data item, and leaves the old value as it is.
You can delete a data value displayed using and by pressing SHIFT CL . Deleting
a data value causes all values following It to be shifted up.
Data values you register are normally stored in calculator memory. The message “Data Full”
appears and you will not be able to input any more data. If there is no memory left for data
storage. If this happens, press the = key to display the screen shown below.
Press 2 to exit data input without registering the value you just input.
Press 1 if you want to register the value you just input, without saving it in memory. If you
do this, however, you will not be able to display or edit any of the data you have input.
To delete data you have just input, press SHIFT CL .
After inputting statistical data in the SD Mode or REG Mode, you will be unable to display or
edit individual data items any longer alter perform either the following operations.
Changing to another mode
Changing the regression type (Lin, Log, Exp, Pwr, Inv. Quad).
Regression Calculations
Use the MODE key to enter the REG Mode what you want to perform statistical calculations
using regression.
REG ........................................................................................................ MODE 3
Entering the REG Mode displays screens like the ones shown below.
Press the number key ( 1 , 2 , or 3 ) that corresponds to the type of regression you want to use
Linear regression
Logarithmic regression
Exponential regression
Power regression
Inverse regression
Quadratic regression
© FAST ČR a. s.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SEC 183 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SEC 183 in the language / languages: English as an attachment in your email.

The manual is 4,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info