Manual Sencor SDH 2020 (page 10 of 13) (English)

759178

Zoom out

Zoom in

1/13

- 10 - 09/2020

EN Dehumidifier

User'smanual

■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user’smanual.

Keep this user'smanual in asafe place where it can be easily retrieved for future use.

■ We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event

of transportation, we recommend that you pack the appliance in the original box

from the manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 Control panel

A2 Handles (on both sides)

A3 Air outlet grille

A4 Condensate tank

A5 Viewing window

A6 Drain hose connection outlet

A7 Travel wheels

A8 Air inlet grille

A9 Air filter (located behind agrille)

A10 Power cord holder (used only for

storage)

DESCRIPTION OF THE CONTROL PANEL

B1 On/Off button

B2 MODE button (for selecting an

operating mode)

B3 Plus (+) button

B4 Minus (-) button

B5 FAN button (fan speed control)

B6 TIMER button (timer control)

B7 Timer indicator light

B8 Low fan speed indicator lights

B9 Medium fan speed indicator lights

B10 Display

B11 Full condensate tank indicator light

B12 Drying mode indicator light

B13 Continuous dehumidification mode

indicator light

B14 Smart dehumidification mode

indicator light

B15 Power On indicator light

BEFORE FIRST USE

■ Before first use, take the appliance and its accessories out of the packaging material

and remove all promotional labels and stickers. Check that neither the appliance nor

any of its parts is damaged.

Note:

Travel wheels A7 may be removed on certain models. Screw the travel

wheels to the underside of the appliance prior to using it.

Do not travel over carpets, thresholds or other obstacles with the

wheels. This could damage them.

Do not move the appliance when the condensate tank is full.

Certain models may also be supplied without travel wheels A7.

Installing the power cord holder

■ When planning on not using the appliance and preparing to store it, install the

holder that serves to conveniently store the power cord.

■ Insert the holder into the cut-out at the rear of the appliance.

INSTALLATION LOCATION OF THE APPLIANCE

■ Locate the appliance on an even, dry and stable surface within reach of aproperly

grounded power socket.

■ Do not use the appliance outdoors.

■ To ensure sufficient air circulation, leave at least 20 cm of free space around the sides

of the appliance.

■ Locate the appliance in a room where temperature does not fall below 5 °C. If

the temperature were to fall below 5°C, there is arisk of frost forming inside the

appliance, which would reduce its efficiency.

■ Do not locate the appliance in the vicinity of dryers, heating devices and other

sources of heat.

■ Use the appliance in locations where humidity could damage books or other

valuable items.

■ The appliance must be used in a closed room in order to ensure its maximum

effectiveness. Therefore, close the doors and windows of the given room.

OPERATING THE APPLIANCE

■ The dehumidifier is used for drying out, for example, flooded basements, rooms

with an increased level of moisture, etc. Do not use it in areas where substances or

items are stored requiring precise room temperature and humidity control.

■ If using the appliance for the first time, it is important to allow it to run continuously

for 24 hours.

■ Use the appliance at an ambient temperature in the range 5°C–32°C(41°F–90°F)

and humidity in the range 30%-80%.

■ Always wait at least 3 minutes before turning the appliance on again.

■ Do not connect the appliance to a power socket to which another appliance is

already connected. We recommend connecting the appliance to an independent

circuit.

■ Make sure that the condensate tank is correctly installed in the appliance, otherwise

the appliance may not function correctly.

OPERATING THE APPLIANCE

■ Make sure that the appliance is located in asuitable place and that it is correctly

assembled. Then insert the power plug into apower socket.

Turning on / off

■ Press button B1 to turn on the appliance. Indicator light B15 will turn on. In order to

turn off the appliance, press button B1 again.

Note:

When the appliance is turned on or off, the compressor may make

anoise. This is normal.

■ The appliance will turn off automatically if the condensate tank A4 is full or

incorrectly installed.

■ If you turn the appliance off and then need to turn it on again quickly thereafter, the

appliance will start again after approximately 3minutes. This function protects the

compressor against damage.

■ The appliance is equipped with an automatic restart function (AUTO-RESTART)

for the event of apower outage. Settings will remain stored in the memory of the

appliance, and after power is restored, the appliance will automatically start in the

previously set mode.

■ When you have finished using it, turn off the appliance and disconnect the power

cord from the power socket.

Display

■ Depending on the selected mode, the display A10 shows: set humidity in %,

automatic start / shut-off time, current humidity in % (+/- 5% in the range 30%

- 90% relative humidity).

Selecting an operating mode

■ To select an operating mode, use button MODE B2. Repeatedly press this

button to select from the following modes: dehumidification, drying, continuous

dehumidification or smart dehumidification.

■Dehumidification mode: in this mode, set the required humidity using the +/-

buttons. No indicator light will be lit.

■Drying mode: indicator light B12 will be lit when the drying mode is activated. In

this mode, fan speed is automatically set to high and it is not possible to change it.

It thereby ensures maximum effectiveness. It is important that this mode is used

in aclosed room. Check that no windows or doors are open. To ensure maximum

effectiveness, spin dry the laundry in awashing machine. Point the appliance so that

the air outlet is directed at the laundry from adistance of 30 – 50 cm. Drying results

on thick and heavy laundry may not always be satisfactory.

Warning:

Do not cover the air outlet with laundry. There is arisk of the

appliance overheating, afire hazards or damage to the unit. Do

not place wet laundry above the appliance or allow water to drip

from the laundry on to the appliance. There is arisk of injury by

electrical shock, potential to electrical wiring or damage to the

appliance.

■Continuous dehumidification mode: indicator light B13 will be lit when the

continuous dehumidification mode is activated. In this mode, the appliance runs

continuously until the condensate tank A4 is completely full of condensate.

■Smart dehumidification mode: indicator light B14 will be lit when the smart

dehumidification mode is activated. In this mode, the appliance automatically

detects the humidity in the room and maintains it in the optimal range of 45%

-55% depending on room temperature. In this mode it is not possible to set the

humidity.

Setting the humidity

■ Use buttons +/- to set the required humidity in the range 35% - 85% RH (relative

humidity). Each time abutton is pressed, the value will increase or decrease by 5%.

The set humidity will be shown on the display B10.

Setting fan speed

■ Button FAN B5 serves to set the fan speed: low (indicator light B8 will be

lit)–medium (indicator light B9 will be lit) – high (both indicator lights B8 andB9

will be lit).

■ For maximum dehumidification speed, set the fan to the high speed. If you need the

fan to be more quiet or if humidity has declined, set the medium or slow fan speed.

Setting an automatic start

■ While the appliance is turned off, press the TIMER B6 button. Use buttons +/- to

set the time after which the appliance will turn on automatically. You can set atime

from 30 minutes to 24 hours, initially in 30-minute increments (up to 10 hours) and

then in 1-hour increments.

■ The set time is automatically saved to memory after approximately 5 seconds.

Automatic shut-off function

■ While the appliance is turned on, press the TIMER B6 button. Use buttons +/- to

set the time after which the appliance will turn off automatically. You can set atime

from 30 minutes to 24 hours, initially in 30-minute increments (up to 10hours) and

then in 1-hour increments.

■ The set time is automatically saved to memory after approximately 5seconds and

the display B10 will show the set humidity.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SDH 2020 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SDH 2020 Manual

Product: