757106
4
Zoom out
Zoom in
Previous page
1/26
Next page
2 EN
EN
Revision 04/2018Copyright © 2018, Fast ČR, a. s.
Installation instructions
1. Installation instructions
• The device is designed to be powered by 12 Vdirect current. Before installing the
unit, check that your vehicle has a12 Vpower supply with the negative pole going to
ground.
• The negative pole of the battery must be disconnected before the device is
connected. This reduces the probability of damaging the device by an accidental
shorting of the circuit.
• Check that the unit is correctly connected according to the coloured leads based on
the wiring diagram. An incorrect wiring connection could cause the malfunction of the
unit or damage to the vehicle'selectrical system.
• Do not forget to connect the loudspeaker lead marked (-) to the (-) terminal. Never
connect the left and right loudspeaker leads together or to the car body.
• Do not cover the ventilation openings on the unit. Blocking them will increase the
temperatures inside the unit, which may damage it or cause afire.
• This device can playback MP3 and WMA digital sound file formats.
• Do not attempt to repair the unit, modifications to the unit may cause amalfunction
or damage the device.
• Stop the vehicle before performing anything that could interfere with driving.
• Do not turn on the device in extremely high or low temperatures. The normal
operating temperature is between -10 and +50 °C.
ATTENTION
Ensure correct connection, particularly the power supply (larger draw) and
backup memory (smaller draw). This will keep the current draw in the turned off
state to aminimum and maintain your set preferences in the car radio memory.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SCT 9411BMR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SCT 9411BMR in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info