757104

Sencor SCT 5051BMR Manual

10
Zoom out
Zoom in
Previous page
1/17
Next page
EN - 8
Item Optional settings
AUTO STORE
(Automatic storage)
Press button to open the automatic storage mode – six of the
strongest stations in the selected broadcast band will automatically be
stored in the channel presets: FM1, FM2, FM3 (l-6), AM1, AM2.
LOC ON/OFF (Local
reception – on/off )
To receive more radio stations or only stations with a strong signal, you
may set the sensitivity of the radio.
AREA (Region)
Select the respective country region for radio reception: USA; LATIN;
EUROPE; RUSSIA; M-EAST (Middle East); ASIA; JAPAN; AUST
(Australia)
CLOCK SET
(Clock settings) Hour and minutes settings
CLOCK FORMAT Select the 12H or 24H time format
RGB
When LED AUTO is shown, the default colour is automatic colour; turn
the volume control dial to select a colour – the colour will change in the
following order: AUTO – GREEN – BLUE – RED – YELLOW – CYAN –
PURPLE – WHITE.
Attention: for the correct function and reception of the radio and RDS, it is necessary to set
the reception region.
Note: activated traffi c announcements (TA) mode scans for stations that are broadcasting
(indicator TP). If the tuned station does not have TP identifi cation, perhaps due to a weak
signal, the device will lower its volume and start scanning for a diff erent station that has
identifi cation.
Listening to the radio:
• Hold down for approximately 2 seconds to store the current stations in
memory.
• Short press to call up the stored station.
1. Repeatedly press button BND to set the broadcast band FM1, FM2, FM3, AM1 (MW1)
or AM2 (MW2).
2. Press button to scan for stations.
Overview of RDS functions
The Radio Data System (RDS) is a service, which makes it possible for FM stations to
broadcast other digital information together with the standard program signal. Some
of them are listed below. It depends on the specifi c station, which data is used for
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SCT 5051BMR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SCT 5051BMR in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info