757124
8
Zoom out
Zoom in
Previous page
1/18
Next page
8 EN
EN
Revision 06/2021Copyright © 2021, Fast ČR, a. s.
Device and controls
Notice: for the correct positioning function you need
adirect and unobstructed view from the camera to
the sky, with no obstacles visible or invisible. Make
sure that the camera is properly positioned behind the
windshield.
Instructions and recommendations:
it is necessary to receive and decode asignal from at least three satellites
for position detection, which takes several tens of seconds to several
minutes after switching on. During this time, the satellite antenna symbol
flashes on the display. Once the position is determined, the symbol is
permanently lit and the calculated speed is shown on the display. To
further refine your position, you need to locate other satellites in the sky
and add their information to the existing ones. Shading the view of the
entire sky (by trees, mountains, tall buildings) reduces the accuracy of the
position calculation or completely disables it. If your car's glass is equipped
with heating (wires) or (anti-heat) shielded by foil or plating, it reduces the
signal transmission to the sensor in the camera and can reduce positioning
accuracy or completely disable it.
Date & time
You can set the time and date manually in the menu. If you have the GPS
sensor turned on and it finds the location, the date and time in the global
format will also be read and saved from the information you receive. For the
correct local time, it is necessary to set your time zone correctly, including
any daylight saving time.
Working with USB
In addition to power, the connector is used to transfer data from the memory
card in the camera to the computer. However, not from the computer to the
card (erasing, formatting), perform the file management either with the camera
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SCR 5000GS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SCR 5000GS in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info