759018
6
Zoom out
Zoom in
Previous page
1/6
Next page
- 6 - Copyright © 2020, Fast ČR, a.s. 03/2020
To clean the hotplate A2 and the surface around it, use asoft, lightly dampened
textile. Then wipe the hotplate A2 dry. In the event of greater soiling, use asmall
amount of neutral kitchen detergent. Remove any remaining detergent using
aclean, lightly dampened cloth. Then thoroughly wipe the cleaned surface until dry.
Do not use steel wool, solvents, cleaning products with an abrasive effect, etc. to
clean the appliance. Otherwise the surface coat of the appliance may be damaged.
Warning:
To prevent the risk of injury by electrical shock, do not submerge
the appliance, power cord or power plug in water or any another
liquid.
Storage
When not using the appliance for an extended period of time, disconnect the power
plug from the power socket, allow the appliance to cool down and clean it according
to the instructions provided above. Before storing it, check that the appliance is
clean and dry. Store the appliance in adry, clean and well-ventilated location not
exposed to extreme temperatures and out of children'sreach.
ERROR MESSAGES
Error
code Cause Solution
E0
There is no pot or pan
on the hotplate A2, or
you placed unsuitable
cookware on it.
Use suitable cookware – more in section
"Induction and selecting suitable
cookware".
E1
or
E2
Heat sensor error.
Stop using the appliance, disconnect the
power plug from the power socket and
contact an authorised service centre.
E3
or
E4
The voltage in the power
socket to which the
cooktop is connected is too
high or too low.
Insert the power plug into apower socket
with avoltage of 220 – 240V.
E5 Overheating Allow the cooktop to cool down. Then put it
into operation again.
E6
The heat fuse was
activated, the cooktop
turned off due to
overheating.
Allow the cooktop to cool down. Check
that the air inlet A1 and the fan and the air
outlet A3 are free and unobstructed. If the
problem persists, stop using the appliance,
disconnect the power plug from the power
socket and contact an authorised service
centre
Note:
If the problem persists, stop using the appliance, disconnect the power
plug from the power socket and contact an authorised service centre.
TECHNICAL SPECIFICATIONS
Rated voltage range ........................................................................................................220 – 240 V~
Rated frequency........................................................................................................................50/60 Hz
Rated power input .....................................................................................................................3,400 W
Hotplate power level setting ......................................................... max. 2,000 W(left hotplate)
max. 1,400 W(right hotplate)
Hotplate temperature settings .......................................................................................60 – 240°C
Operating time settings ..........................................................................................1 – 180 minutes.
Safety class for electrical shock protection: Class II – Electrical shock
protection is provided by double or heavy-duty insulation.
We reserve the right to change text and technical specifications.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at asite designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling hand over
these appliances to determined collection points. Alternatively, in
some European Union states or other European countries you may
return your appliances to the local retailer when buying an equivalent
new appliance.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human health, which
could result from improper waste disposal. Ask your local authorities or collection
facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier
for the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
This product meets all the basic requirements of EU directives related to
it.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SCP 4601 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SCP 4601 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info