Manual Sencor SCP 4501 (page 5 of 6) (English)

759017

Zoom out

Zoom in

1/6

- 5 - 03/2020

EN Double Induction

Cooktop UltraFlat

User'smanual

■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user’smanual.

Keep this user'smanual in asafe place where it can be easily retrieved for future use.

■ We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event

of transportation, we recommend that you pack the appliance in the original box

from the manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 Air inlet (along the sides of the

appliance)

A2 Hotplate

A3 Fan and air outlet (on the underside

of the appliance)

A4 Control panel with display

DESCRIPTION OF THE CONTROL PANEL

B1 Timer indicator light

B2 Child lock indicator light

B3 Display – shows the hotplate power

level, set temperature, automatic

shut-off time or error message

codes. If the cooktop is in the stand-

by mode, the display will show

"OFF".

B4 Temperature indicator light

B5 Power level indicator light

B6 Child lock button

B7 Timer button

B8 Minus (–) button

B9 Slider for quick setting of power

level / temperature

B10 Plus (+) button

B11 Function selection button

B12 On/Off button

Before first use

■ Before first use, take the appliance and its accessories out of the packaging material

and remove all promotional labels and stickers. Check that neither the appliance nor

any of its parts is damaged.

■ Wipe the surface of the appliance with aclean, lightly dampened cloth. Then wipe

it dry.

Induction and selecting suitable cookware

■ Underneath the hotplate there is an induction coil that, when turned on, creates

avariable electromagnetic field. The induction current generated by this field starts

heating the bottom of the pot or pan that is placed on the hotplate. To ensure

proper operation, it is important that the cookware is ferromagnetic. This property

can be verified using asmall magnet placed against the bottom of the pot or pan.

If there is an attraction between the magnet and the bottom of the pot or pan then

the cookware is ferromagnetic and hence suitable for use on an induction hotplate.

This includes, for example, cast iron, steel, enamelled and stainless steel cookware

with aferromagnetic bottom.

■ We recommend that the base of the cookware is flat and straight. The minimum

diameter of the base is 12cm, the maximum diameter may be up to 2 cm past the

edge of the hotplate. The induction hotplate automatically adapts to the size of the

used pot or pan.

■ If, on the other hand, there is no attraction between the magnet and the bottom of

the pot or pan then the cookware is not suitable for use on an induction hotplate.

As arule, this includes cookware made from copper, pure stainless steel, aluminium,

glass, wood, ceramics, stone, etc.

Note:

When unsuitable cookware is used or if the hotplate detects that there is

no cookware on it, then it will turn off automatically. This is anormal safety

feature that prevents damaging the appliance.

RADIO WAVE INTERFERENCE

■ The use of the induction cooktop may cause interference to your radio, television

or similar receivers.

■ If this occurs, we recommend to:

- redirect the radio or television antenna;

- move the cooktop farther away from the radio, television or receiver;

- insert the power plug into adifferent power socket with an independent circuit.

Operating the appliance

■ Place the appliance on akitchen countertop or on atable within reach of apower

socket. At the same time, make sure that all safety instructions are followed.

■ Make sure that there are no foreign objects located on the hotplate A2 and that

its surface is clean.

■ Fully unwind the power cord and connect it to apower socket.

Note:

Since the appliance heats up during operation, the power cord must be

located in such away that it is not touching the surface of the appliance.

Note:

Plug the appliance into aseparate power socket with an independent

circuit breaker. Necessary circuit breaker – 16A.

Turning on the cooktop

■ To turn on the cooktop, press button B12. The display B3 will show "ON".

■ Place apot or pan on the hotplate A2.

■ Press the function selection button B11. The appliance automatically detects the

pot or pan. If the used cookware is suitable, the appliance will start automatically

at the preset power level. The display B3 will show the preset power value and the

fan A3 will start.

■ If the used cookware is not suitable, the appliance will not start. The error message

E0 will appear on the display B3 and the appliance will beep. After awhile the

appliance will automatically switch to the stand-by mode.

■ If you take the cookware off the hotplate A2, the display B3 will show the

error message E0 and the appliance will beep. After a while the appliance will

automatically switch to the stand-by mode. The display B3 will show "H" or "OFF".

Turning off the cooktop

■ When not using the cooktop, press button B12 to turn the cooktop off. The display

B3 will show "H" or "OFF". The cooktop will switch to the stand-by mode. If the

temperature of hotplate A2 is higher than 80°C, then display B3 will show "H" after

being turned off. As soon as the temperature of the hotplate A2 falls below 80°C,

the "H" will disappear from the display B3.

■ Disconnect the power plug from the power socket.

Note:

The fan A3 will run for acertain time after the cooktop is turned off so that

it cools down faster. Do not pull the power plug out of the power socked

until the fan A3 turns off completely.

Note:

When first turned on, there may be light smoke emitted. This is an entirely

normal event, which will disappear after afew minutes.

Setting the power level

■ When the cooktop is turned on for the first time, it will start at the preset power level.

■ Press the function selection button B11 until the power level indicator light B5 is lit.

■ To set the power level, use buttons – / + or the slider B9. The power level can be set in

the range 100 - 2,000 W(left hotplate) or 100 - 1,400 W(right hotplate).

Note:

Prior to setting the power level, always ensure that the power level

indicator light B5 is lit. If it is not, first press the function selection button

B11.

Setting the temperature

When the cooktop is turned on for the first time, the preset temperature is set to

"120°C".

Press the function selection button B11 until the temperature indicator light B4 is lit.

To set the temperature, use buttons – / + or the slider B9. You can set the temperature

in the range from 60 to 240°C.

Setting the power level and automatic shut-off

■ Press the function selection button B11 until the power level indicator light B5 is lit.

Then press the timer button B7. The display B3 will show "0:00". Using the buttons

– / +, set the time after which the cooktop will automatically turn off, in the interval

from 1 minute to 3 hours. The automatic shut-off is set in one-minute increments.

■ The set automatic shut-off time will start flashing on the display B3 for approximately

5 seconds and then the appliance will automatically switch to the power level

setting. The default power will appear on the display B3. To set the power level, use

buttons – / + or the slider B9.

■ The set time will start counting down on the display B3.

■ During the set time, the set power level can be set using buttons – / +, or the slider

B12.

■ When the set time elapses, the cooktop will beep and automatically switch to the

stand-by mode. The display B3 will show "H" or "OFF".

Setting the temperature and automatic shut-off

■ Press the function selection button B11 until the temperature indicator light B4 is

lit. Then press the timer button B7. The display B3 will show "0:00". Using the buttons

– / +, set the time after which the cooktop will automatically turn off, in the interval

from 1 minute to 3 hours. The automatic shut-off is set in one-minute increments.

■ The set automatic shut-off time will start flashing on the display B3 for

approximately 5 seconds and then the appliance will automatically switch to the

temperature setting. "120°C" will appear on the display B3.

■ To set the temperature, use buttons – / + or the slider B9.

■ The set time will start counting down on the display B3. The countdown time and

the set temperature will be intermittently shown on the display B3.

■ During the set time, the set temperature can be set using buttons – / +, or the slider

B12.

■ When the set time elapses, the cooktop will beep and automatically switch to the

stand-by mode. The display B3 will show "H" or "OFF".

Child safety lock

■ The appliance is equipped with achild lock function that enables the control panel

to be locked to prevent unwanted changes to the settings.

■ To activate the child lock function, hold down button B6 for awhile. Indicator light

B2 will be lit and the control buttons will be disabled.

■ To deactivate the child lock function, hold down button B6 for awhile. The indicator

light B2 will turn off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SCP 4501 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SCP 4501 Manual

Product: