688571
9
Zoom out
Zoom in
Previous page
1/10
Next page
EN-9
Electric Coffee Grinder
SCG 2050RD / SCG 2051BK / SCG 2052WH
EN
11/2016
Copyright © 2016, Fast ČR, a.s.
CLEANING AND MAINTENANCE
Before cleaning it, make sure that the coffee grinder is turned off, disconnected from the power
socket and that the grinding blade A3 is not moving.
Wash the lid A1 using warm water with kitchen detergent. Then rinse it with clean water and dry
thoroughly with a fine wiping cloth.
Remove any remaining ground coffee or remains of other foodstuffs that you processed from the
hopper A2. Thoroughly clean the hopper A2 and the grinding blade A3 with a clean lightly
dampened wiping cloth and then wipe dry.
Attention:
When cleaning the grinding blade A3, be very careful not to injure yourself on the sharp edge.
Use a dry or lightly dampened wiping cloth for cleaning the base unit A4. Do not rinse it under
running water or submerge it in water or another liquid.
Do not use thinners, solvents or cleaning agents that cause abrasion, etc. to clean the product.
STORAGE
When not using the appliance, store it in a dry place out of children's reach. Wind up the power cord
into the storage area A7 and close the lid A1 so that dust does not accumulate inside the hopper
A2.
TECHNICAL SPECIFICATIONS
Rated voltage range ....................................................................................................................... 220−240 V
Rated frequency ................................................................................................................................ 50/60 Hz
Rated power input .................................................................................................................................150 W
Safety class (for electric shock protection) ....................................................................................................II
Noise level .......................................................................................................................................... 85 dB(A)
The declared noise emission level of the appliance is 85 dB(A), which represents a level A of acoustic
power with respect to a reference acoustic power of 1 pW.
Explanation of technical terminology
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or heavy-duty insulation.
Changes to text and technical parameters are reserved.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SCG 2051BK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SCG 2051BK in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info