Manual Sencor SCF 3200 (page 10 of 10) (English)

759221

Zoom out

Zoom in

1/10

- 10 - 08/2019

Note:

Temperature can only be set in the energy saving mode and the

comfort mode. It is not possible to set the temperature in the Frost-

free mode.

Setting the day of the week and the clock

■ Hold down the button B6 until the day of the week icon starts flashing. Use the

buttons ▲/▼ to select the appropriate day of the week. Number “1” represents

“Monday”, number “7” represents “Sunday”.

■ Once the correct day of the week is selected, hold down button B6 until the hour

digit starts flashing. Use the buttons ▲/▼ to set the current hours.

■ Hold down the button B6 until the minute icon starts flashing. Use the ▲/▼

buttons to set the current minutes.

■ To save the day of the week and the clock settings, press button On/Off B3 or wait

approximately 10 seconds and the convection heater will automatically save your

settings.

Convection heater operation programming function

This function makes it possible to program the convection heater to start on any day of

the week at agiven time for aset period in the mode of your choice.

1. Press the programming button B4. The programming icon C3 and the weekday icon

will start flashing on the display A1.

2. Use the buttons ▲/▼ to select the day of the week and confirm your selection by

pressing the programming button B4.

3. The hour digits will start flashing. Use the buttons ▲/▼ to set the hour (60 minutes),

when the convection heater is to run.

4. Repeatedly press the button B5 to select the operating mode in which the

convection heater is to run in the given time. The selected operating mode will be

graphically shown on the display A1 – see table below.

5. To save your settings, press the On/Off button B3 or wait approximately 10 seconds

and the convection heater will automatically save your settings. And one hour (60

minutes) of operation will be programmed.

Repeat steps 1 – 5 to program the operation of the convection heater for other hours

of the day also for other days of the week.

Graphical display of the operating modes

Stand-by mode

– the convection

heater will be

turned off.

Frost-free mode Power saving mode Comfort mode

■ As soon as you finish programming operation for every day of the week, hold down

the programming button B4 for approximately 3 seconds. “P0” will start flashing on

the display A1 and to save the programming, press the On/Off button B3 or wait 10

seconds and the convection heater will save the program automatically.

■ To start the program, press the day and hour setting button B6. The timer icon C6

will appear on the display.

Note:

Steps 1 – 5 always program only asingle hour (60 minutes) of operation

of the convection heater.

If you need to adjust the set operation of the convection heater, it is

necessary to perform steps 1 – 5 below in the respective days and

hours and then save the program as P0.

■ The convection heater is also equipped with three preset programs – P1/P2/P3.

■ Hold down the programming button B4 until “P0” starts flashing. Using buttons

▲/▼ to select aprogram.

Program P1 Monday –

Sunday

00:00 – 01:00 Comfort mode

01:00 – 08:00 Power saving mode

08:00 – 24:00 Comfort mode

Program P2

Monday –

Friday

00:00 – 01:00 Comfort mode

01:00 – 05:00 Power saving mode

05:00 – 09:00 Comfort mode

09:00 – 19:00 Power saving mode

19:00 – 24:00 Comfort mode

Weekend

00:00 – 01:00 Comfort mode

01:00 – 08:00 Power saving mode

08:00 – 11:00 Comfort mode

11:00 – 13:00 Power saving mode

13:00 – 16:00 Comfort mode

16:00 – 20:00 Power saving mode

20:00 – 24:00 Comfort mode

Program P3

Monday –

Friday

00:00 – 01:00 Comfort mode

01:00 – 05:00 Power saving mode

05:00 – 09:00 Comfort mode

09:00 – 12:00 Power saving mode

12:00 – 16:00 Comfort mode

16:00 – 18:00 Power saving mode

18:00 – 24:00 Comfort mode

Weekend

00:00 – 01:00 Comfort mode

01:00 – 05:00 Power saving mode

05:00 – 24:00 Comfort mode

Restoring factory settings

■ In the event that it is necessary to cancel all your settings and programming, hold

down both the B4 and B5 buttons at the same time for approximately 3 seconds.

This will restore the factory settings and all your settings and programming will be

deleted.

Open window detection

■ The convection heater is equipped with a sensor that measures the room

temperature. When the temperature suddenly falls by at least 5 °C, the convection

heater will turn off automatically to reduce power consumption. Asudden fall in the

temperature is usually caused by awindow or door being opened.

Thermal protection

■ The appliance is equipped with athermal fuse that automatically turns it off upon

overheating.

■ Should such a situation occur, turn the appliance off and disconnect it from the

power socket. Then allow it to cool down for at least 15 minutes.

■ Before you put the appliance back into operation, check that its vents are not

blocked.

■ If you are unsuccessful putting the appliance back into operation, please contact an

authorised service centre.

CLEANING AND MAINTENANCE

■ Disconnect the power plug from the power socket and allow the appliance to cool

down before cleaning it.

■ For cleaning, do not use cleaning products with an abrasive effect, solvents, etc. that

could damage the surface of the appliance.

Warning:

To prevent the risk of injury by electrical shock, do not submerge

the appliance, power cord or power plug in water or any another

liquid.

■ Keep the appliance in aclean condition. Clean the appliance regularly to ensure dust

does not accumulate inside.

■ To clean the outer surface of the of the appliance, use aclean, dry cloth. To remove

dust from the outer surface, you may also use avacuum cleaner.

Storage

■ When not using the appliance for an extended period of time, disconnect the power

plug from the power socket, allow the appliance to cool down and clean it according

to the instructions in chapter “Cleaning and maintenance”.

■ Before storing it, check that the appliance and all its accessories are thoroughly clean

and dry.

■ Store the appliance in a dry, clean and well-ventilated location not exposed to

extreme temperatures and out of children’sreach.

TECHNICAL SPECIFICATIONS

Rated voltage range ........................................................................................................220–240 V~

Rated frequency........................................................................................................................50/60Hz

Rated power input ......................................................................................................................1500W

Temperature range ................................................................................................................15–35°C

Protection class .................................................................................................................................IP24

Power output settings ...............................................................................................750W/1500 W

We reserve the right to change text and technical specifications.

INSTRUCTIONS AND INFORMATION REGARDING THE

DISPOSAL OF USED PACKAGING MATERIALS

Dispose of used packaging material at asite designated for waste in your municipality.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on products or original documents means that used

electric or electronic products must not be added to ordinary

municipal waste. For proper disposal, renewal and recycling hand over

these appliances to determined collection points. Alternatively, in

some European Union states or other European countries you may

return your appliances to the local retailer when buying an equivalent

new appliance.

Correct disposal of this product helps save valuable natural resources

and prevents potential negative effects on the environment and human health, which

could result from improper waste disposal. Ask your local authorities or collection

facility for more details.

In accordance with national regulations penalties may be imposed for the incorrect

disposal of this type of waste.

For business entities in European Union states

If you want to dispose of electric or electronic appliances, ask your retailer or supplier

for the necessary information.

Disposal in other countries outside the European Union.

This symbol is valid in the European Union. If you wish to dispose of this product,

request the necessary information about the correct disposal method from the local

council or from your retailer.

This product meets all the basic requirements of EU directives related to

it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SCF 3200 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SCF 3200 Manual

Product: