760046
4
Zoom out
Zoom in
Previous page
1/6
Next page
EN-4
EN
Digital scale
SBS 2507RD / SBS 2507BL / SBS 2507WH
01/2011 Copyright © 2011, Fast ČR, a.s.
USER INSTRUCTIONS
Before fi rst use
1) To ensure precise weighing, place the scale on a fl at and hard surface such as a parquet fl oor, tiles,
linoleum, etc. We do not recommend weighing on carpet.
2) Always take off your shoes before weighing.
3) We recommend checking your weight always at the same time, best in the morning after waking
up. In the morning you eliminate any differences in your weight due to food intake, digestive pro-
cess or physical activities.
4) The measured result may be misleading if weighing is done after intensive exercise, dieting or
during extreme dehydration.
5) Stand still during measuring.
6) If you will not use the scale for a long time, store it in a horizontal position. This position better
protects the sensitive sensors located in the scale footings.
7) Do not place or leave any objects on the scale that may place unnecessary stress on the sensors.
8) Strong electromagnetic fi elds may negatively infl uence the weighing precision. Do not use the
scale in environments with strong magnetic fi elds.
Battery
Remove the battery compartment cover located on the under side of the scale and remove the insula-
tion tape, which prevents the discharge of the battery during transport.
USE
This scale is has a patented function "Auto-on". It is not necessary to tap or to otherwise activate into
the operational mode before weighing. If you wish to fi nd out your weight, simply step on the scale,
which will immediately display your current weight without the need to wait.
Protection against overload
This scale is equipped with a sensor against overload. If any overload occurs, the display will show the
warning symbol ” Err“.
Automatic shut off function
Your scale is equipped with an automatic shut off function. This function will turn the scale off if no
activities are detected within 10 seconds.
Switching between weight units
Your scale is equipped with a weight unit switch, which enables you to display the weight in different
units. If you want to switch between metric (kilograms) and imperial units (pounds or stones), move the
switch on the rear of the scale to the applicable position (kg --> lb --> st). The change in units will be
shown on the display of the scale.
Note
1 lb (pound) = 0,45 kg
1 st (stone) = 6,35 kg
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SBS 2507 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SBS 2507 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info