760044
6
Zoom out
Zoom in
Previous page
1/13
Next page
05/2020
- 6 -
Copyright © 2020, Fast ČR, a.s.
It is recommended to have the operation of the device checked every 2 years
and after maintenance or repair, by means of repeated testing of the minimum
specifications within the range of error indications of pressure in the cuff and
within the scope of escaping air (testing at least at 50 mmHg and 200mmHg).
Please dispose of the ACCESSORIES, removable parts and HEALTHCARE
ELECTRICAL EQUIPMENT according to local codes.
The manufacturer shall upon request provide the connection diagram, list of
components, descriptions, calibration instructions, etc. to make potential repairs
simpler for an authorised service.
The operator of the device must not simultaneously touch the battery outputs
and the patient.
Cleaning: Adusty environment may affect the performance of the device. Use
asoft wiping cloth to clean the entire device before and after use. Do not use any
coarse or volatile cleaning agents.
The device does not require calibration within the scope of two years of reliable
operation.
If you have any problem with the device, e.g. settings, maintenance or use, please
contact an AUTHORISED SERVICE CENTRE. Do not remove the cover or repair the
device yourself in the event that it does not work. The device must be serviced,
repaired or the cover removed only by a qualified person at the authorised
service centre.
Please contact an authorised service centre in the event of unexpected operation
or function.
Keep the device out of reach of infants, small children and animals to prevent
potential inhalation or swallowing of small parts. There is arisk of aserious to
fatal situation arising.
Be careful to prevent chocking since the hose is excessively long.
If the electrical healthcare equipment is stored in avery cold room, then it is
necessary to wait at least 30 minutes for it to heat up before using it. Conversely,
if the electrical healthcare equipment is stored in a very hot room, then it is
necessary to wait at least 30 minutes for it to cool down before using it.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SBP 6800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SBP 6800 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info