758835
3
Zoom out
Zoom in
Previous page
1/7
Next page
11/2017
- 3 -
Copyright © 2017, Fast ČR, a.s.
The appliance is equipped with athermal fuse protecting the motor from damage in case of overload. If the appliance
shuts off as aconsequence of the motor being overloaded, disconnect it from the power socket and allow it to cool
down for at least 30 minutes. Then you may continue using it.
Do not turn on the appliance when it is empty. Incorrect use of the appliance may negatively affect its lifetime.
If ingredients stick to the blade assembly or the inside walls of the blending jug, turn the appliance off and unplug it
from the power supply. Make sure that the blade assembly has stopped rotating. Carefully remove the blending jug
from the motor unit. Open the lid and, using aspatula, clean the blade assembly and the walls of the blending jug.
Properly close the lid and seat the blending jug back on to the motor unit. Plug the power cord into apower socket
and then you may continue blending.
When handling the blade assembly, be very careful not to injure yourself on its sharp cutting edge. This applies
especially when removing the blade assembly from the respective jug, when emptying the jug and when cleaning.
The included jugs are not intended for heating food in amicrowave or for long-term food storage.
Always turn off the appliance and disconnect it from the power socket when not be using it and when leaving it
without supervision, before changing accessories, before assembling, disassembling, cleaning and moving it.
Check that the motor unit is turned off, disconnected from the power socket and that the rotating parts have come
to acomplete stop before removing the removable accessories from the motor unit.
Clean it according to the instructions in chapter Cleaning and maintenance. Do not submerge the motor unit and its
power cord in water or any other liquid, or wash these parts under running water.
Ensure that the power plug contacts do not come into contact with moisture. Do not place heavy items on the power
cord. Make sure that the power cord does not hang over the edge of atable or that it is not touching ahot surface.
Disconnect the appliance from the power socket by pulling on the plug, never pulling on the power cord. Otherwise,
this could damage the power cord or the socket.
If the power cord is damaged, it must be replaced by an authorised service centre or by another similarly qualified
person, this will prevent the creation of adangerous situation. It is forbidden to use the appliance if it has adamaged
power cord.
Do not use the appliance when it is not functioning properly or showing any signs of damage. In order to prevent
ahazardous situation arising, do not repair the appliance yourself or modify it in any way. Have all repairs performed
at an authorised service centre. By tampering with the appliance, you risk voiding your legal rights arising from
unsatisfactory performance or quality warranty.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SBL 4870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SBL 4870 in the language / languages: English as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info