758826

Sencor SBL 3272 Manual

9
Zoom out
Zoom in
Previous page
1/12
Next page
Blender
SBL 3271SS / SBL 3272RD
EN
EN-9
2015 11/2015
When using the grinder, proceed according to the instructions in the guide for processing
ingredients on pages 9 and 10.
2.3 Assemble the grinder and attach it to the motor unit A7 according to the instructions in chapter
Assembling and disassembling the appliance.
2.4 Connect the power cord to the power socket and set the speed dial A8 to the required speed level
of 1 or 2. Level 1 is slower and level 2 is faster. We recommend to first set the slower speed. Then
you can increase the speed to level 2. The pulse level is appropriate when you wish to blend food
only very quickly. To start the pulse level, turn the speed dial A8 to the position "P" and hold it in
this position for a moment. As soon as you release the speed dial A8, it will automatically return
to position 0 (Off).
Attention:
The maximum operating time is 2 minutes. Do not leave the appliance in continuous operation
for longer than indicated above. Then allow the appliance to cool down for 2 minutes. When
processing hard foods, do not leave the appliance in continuous operation for longer than 1
minute.
2.5 After you have finished using the appliance, set the speed dial A8 to position 0 (Off) and disconnect
the power cord from the power socket. Check that the grinding blade assembly A5 has stopped
rotating and take the grinder off the motor unit A7.
2.6 Disassemble the grinder according to the instructions in chapter Assembling and disassembling the
appliance. Use a soft plastic spatula to remove food from the blending jar A0. Then clean all used
parts according to the instructions in chapter Cleaning and maintenance.
3. Advice and tips for blending
• First cut food with a firm consistency such as fruit and vegetables into smaller pieces measuring 2
to 3 cm and only then place it inside the blending jar A3.
• It is better to separate larger amounts of ingredients into several smaller batches. First blend one
batch and then gradually add further batches through the hole in the outer lid A2 while blending.
In this way, you will achieve better results than by adding all ingredients into the blending jar
A3 at once. Before adding every additional batch, first check that the maximum capacity of the
blending jar A3 will not be exceeded.
• If you need to blend food of a solid consistency together with liquids, we recommend that you first
blend the food of solid consistency with a smaller amount of the liquids. Then gradually add the
remaining liquids through the hole in the outer lid A2 while blending. While blending, always use
your hand to hold down the lid A2 from above.
• To blend very thick liquids, we recommend using the pulse level so that the blade assembly A5
does not get jammed. Start the blender repeatedly in short intervals.
• Ice cubes must be processed immediately upon being removed from the freezer. When the ice starts
to melt, the ice cubes will stick together and it will not be possible to blend them.
QUICK GUIDE TO PROCESSING INGREDIENTS
Blender (four blade assembly)
Ingredients Speed selection Recommended blending time
Fruit, vegetables cut into smaller pieces 1 30 s
Baby food 1 40 s
Spreads, dressings, marinades 1 30 s
Smoothies and cocktails 2 40 s
Soups 2 30 s
Ice cubes P (Pulse level) –
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SBL 3272 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SBL 3272 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info