758752

Sencor SBL 2206 Manual

7
Zoom out
Zoom in
Previous page
1/10
Next page
Smoothie Maker
SBL 2200WH / SBL 2201GR / SBL 2202BL / SBL 2203OR / SBL 2204RD /
SBL 2205VT / SBL 2206YL / SBL 2207TQ / SBL 2208RS
EN
EN-7
2016 10/2016
INTENDED USE AND FUNCTIONS OF THE APPLIANCE
• This Smoothie Maker is ideal for preparing fresh fruit or fitness drinks, dairy and other sorts of
cocktails, mixed drinks, excellent salsa, cream soups, sauces and mixed baby foods. It is equipped
with a blade unit with four high-quality stainless-steel blades and a blending containers of two
sizes, which are made of sturdy PVC plastic and also serve as a practical drinking bottle. The lid
has a closable spout to allow easy carrying with no spilling. Both bottles fit perfectly into a car
cupholder. Anti-slip feed with suction cups ensure excellent stability when the Smoothie Maker is
in use. The bottle, lid and blade unit are dishwasher safe.
BEFORE FIRST USE
1. Remove the appliance and its accessories from the packaging.
2. Thoroughly wash all removable parts intended for contact with food (large blending container
A1, small blending container A7, lid A6 and the blade unit A2) in warm water with a neutral
dish detergent. Then rinse them with clean water and let them dry or thoroughly dry them with
a soft towel.
Warning:
When cleaning the blade unit A2, be extra cautious to avoid injury. The blade edges A2 are
sharp.
ASSEMBLING AND DISMANTLING THE APPLIANCE
• Before you begin to assemble or disassemble the appliance, make sure the motor unit A3 is turned
off and unplugged from the wall outlet and the rotating parts are not in motion.
1. Assembling and dismantling the blending container
1.1 Turn blending container A1 or A7 so that its neck points upward.
1.2 Place the blade unit A2 against the neck of container A1 or A7 so that the blades point into
A1 or A7. Screw the blade unit A2 onto the neck of container A1 or A7. Turn the assembled
container downward with the blade unit A2.
Note:
Put food and liquids into container A1 or A7 before you attach the blade unit to it A2.
1.3 To dismantle, proceed in the opposite order.
2. Attaching and removing the blending container from the motor unit
2.1 Place the motor unit A3 on a flat, dry surface, such as a kitchen counter. Onto the motor unit A3,
place the blending container so that the arrow indicator on the blade unit A2 lines up with the
arrow on the motor unit A3. Turn the blending unit clockwise until it attaches firmly to the motor
unit A3. If the blending container assembly is correctly attached to the motor unit A3, it cannot
be lifted separately.
2.2 To remove the blending container from the motor unit A3, proceed in the opposite sequence.
3. Assembling the drinking bottle
To assemble the drinking bottle, screw the lid A6 onto the neck of bottle A1 or A7. Firmly tighten
the lid A6. When carrying, make sure the spout is properly closed, so that the bottle’s contents do
not spill.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SBL 2206 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SBL 2206 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info