758751
8
Zoom out
Zoom in
Previous page
1/10
Next page
EN-8
EN
Smoothie Maker
SBL 2200WH / SBL 2201GR / SBL 2202BL / SBL 2203OR / SBL 2204RD /
SBL 2205VT / SBL 2206YL / SBL 2207TQ / SBL 2208RS
2016 10/2016
USING THE APPLIANCE
1. Make sure that the motor unit A3 is turned off and unplugged.
2. Put the ingredients you want to mix into blending container A1 or A7. We recommend putting
the food into container A1 or A7 in the order shown in the chapter “Quick guide to processing
ingredients”. Containers A1 and A7 can hold food up to the 600 ml or 300 ml line.Do not put
more food and liquid into container A1 or A7.
Warning:
Before pouring hot liquids into blending containers A1 or A7 and blending them, let them
cool to at least 40°C.
3. Assemble the blending container and then attach the blending container assembly to the motor
unit A3 according to the instructions in the chapter “Assembling and dismantling the appliance”.
4. Plug the power cable in and press the pulse switch A4 to start the smoothie maker. Press and hold
switch A4 for as long as you want to mix. To turn the smoothie maker off, let up on switch A4.
Warning:
The maximum operating time is 2 minutes. Do not let the appliance run continuously longer
than the time indicated above. Then let the appliance cool for 2 minutes. When processing
thicker foods or liquids, do not let the appliance run for more than 1 minute.
5. If food sticks to the blade unit A2 or to the wall of the blending container A1 or A7, turn the
appliance off and unplug it. Make sure that the blade unit A2 has stopped turning. Remove
the container set from the motor unit A3 and turn it so that the blade unit A2 points upward.
Remove the blade unit A2. Use a plastic spatula to clean the blade unit A2 and wall of container
A1 or A7. Put the blending container together and attach it back to the motor unit A3. Plug the
cord in and continue blending.
6. After blending is finished, unplug the power cable. Make sure that the blade unit A2 has stopped
turning, and remove the blending container assembly from the motor unit A3.
7. Turn blending container A1 or A7 so that the blade unit A2 points upward. Remove the blade
unit A2 and, if necessary, close bottle A1 or A7 with the lid A6 or pour the contents into
another appropriate container.
8. Clean all parts used according to the instructions in the chapter “Cleaning and maintenance”.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SBL 2205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SBL 2205 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info