Manual Sencor SBG 5000 (page 5 of 6) (English)

758881

Zoom out

Zoom in

1/6

01/2017

- 5 -

Multi-purpose Contact Grill

User'smanual

■ Prior to using this appliance, please read the user’smanual thoroughly, even if you already have

experience in using similar appliances. Only use the appliance in the manner described in this

user’smanual. Keep this user’smanual in asafe place where it can be easily retrieved for future use.

■ We recommend saving the original cardboard box, packaging material, purchase receipt and

responsibility statement of the vendor or warranty card for at least the duration of the legal liability

for unsatisfactory performance or quality. In the event of transportation, we recommend that you

pack the appliance in the original box from the manufacturer.

DESCRIPTION OF THE CONTACT GRILL

A1 Top griddle plate release button

A2 Removable top griddle plate

A3 Removable bottom grill plate

A4 Bottom grill plate release button

A5 Removable drip tray

A6 30-minute timer

A7 Handle for carrying and tilting open the top plate

A8 Top griddle plate cover

A9 Sliding lock for locking and unlocking the grill plates and setting the height of the top griddle plate

A10 Top plate hinge lock release button

A11 Timer setting indicator

A12 Heating grill plates indicator

A13 Temperature control knob with arange of 80–240 °C

A14 Base unit

A15 Power cord storage space

A16 Scraper

REMOVING AND ATTACHING THE GRILL PLATES

■ Prior to removing or attaching the grill plates, check that the grill is turned off, disconnected from

the power socket and has cooled down.

■ To attach or insert agrill plate, it is necessary to slide the lock A9 to the “OPEN” position and to use

the handle A7 to tilt open the top plate A2 into the vertical position.

■ To remove the top plate A2, use one hand to push and hold down button A1, and the other to

remove the plate A2. After removing it, release button A1. To remove the bottom grill plate A3, use

one hand to push and hold down button A4, and the other to remove the plate A3. After removing

it, release button A4.

■ To attach, insert the top plate A2 into the top cover A8 so that the cut outs at the rear of the plate

A2 slide on to the tabs at the rear of the cover A8. Then push the plate A2 against the cover A8, so

that the tab under the grill plate A2 slides into the hole in the cover A8. Attach the bottom plate A3

to the base unit A14 in the same way.

LOCKING AND UNLOCKING THE GRILL PLATES AND SETTING

THE HEIGHT OF THE TOP GRIDDLE PLATE

■ When the top griddle plate A2 is tilted down on to the bottom grill plate A3 and the lock A9 is set

in the “LOCK” position, the grill plates are locked together. This setting is intended for carrying the

grill in the vertical position and for storing the grill in the vertical position.

■ To release the top griddle plate A2, slide the lock A9 to the “OPEN” position. Now the top griddle

plate A2 can be tilted open all the way to the vertical position.

■ Setting the sliding lock A9 to position 1 to 5 adjusts the height of the top griddle plate A2, i.e. the

distance of the top griddle plate A2 from the bottom grill plate A3. Height adjustment is suitable for

grilling fish, hamburgers, vegetables, toasted sandwiches and cooking other delicate foods where

it is undesirable for the top griddle plate A2 to compress the food with its full weight. When setting

the height, it is necessary to lift and hold the top griddle plate A2 above the bottom grill plate A3.

To lift and hold the griddle plate A2, use the handle A7.

■ To tilt open the top griddle plate A2 so that it is level with the bottom grill plate A3, hold down

button A10 while at the same time tilting open the top griddle plate A2 so that the handle A7 is

resting on the tabletop or kitchen countertop. This will double the grilling area. After tilting open

the top griddle plate A2, release button A10.

NON-STICK COATING ON THE GRILL PLATES

■ The grill plates on your contact grill have aspecial non-stick surface coating. This coating enables

you to prepare healthy meals while using aminimum amount of fat or oil.

■ For placing food on the grill or removing it, use only heat-resistant wooden, plastic or silicone

kitchen utensils.

■ Do not use sharp or metal kitchen utensils and do not cut the food directly on the grill plate.

The manufacturer takes no responsibility for damage to the coating caused by the use of sharp

objects or metal utensils.

■ Any discolouration of the surface of the grill plates affects only appearance, not functionality.

BEFORE FIRST USE

■ Before first use, remove the contact grill from the packaging material and remove all promotional

materials including labels located on the grill/griddle plates. Wipe the griddle plate A2 and grill

plate A3 with a clean dampened cloth and then wipe dry. Take the removable drip tray A5 and

wash it in warm water using aneutral kitchen detergent. Then rinse it under clean running water,

wipe it dry and put it back in its place.

■ Wash the scraper A16 in warm water using aneutral kitchen detergent. Then rinse it under clean

running water and wipe it dry.

■ The griddle/grill plates A2 and A3, the removable drip tray A5 and the scraper A16 can also be

washed in adishwasher (in the upper rack).

■ Do not rinse or submerge the grill or its power cord in water or any other liquids.

■ Before first use, run the grill empty for 10 minutes with the temperature control knob A13 set to

the maximum grilling temperature. Then turn the grill off, disconnect it from the power socket and

allow it to cool down.

Note:

When first turned on, a small amount of smoke may be emitted. This is a completely

normal event.

USING THE CONTACT GRILL

■ Before every use, we recommend to apply athin layer of high-temperature cooking oil on to the

griddle/grill plates A2 andA3.

■ Check that the removable drip tray A5 is properly inserted all the way into the base unit A14

and that the griddle/grill plates A2 andA3 are installed in their place. Check that the timer and

temperature control knob are set in the off position, and connect the grill to apower socket.

■ If the griddle/grill plates are locked together, release them by setting the lock A9 to the “OPEN”

position. Allow the grill to heat up by setting timer A6 to 5 minutes and the temperature control

knob A13 to position 4 – “SUPER HIGH” (maximum temperature). To heat up faster, leave the griddle

plate A2 tilted down. When the timer A6 is set, indicator A11 will be lit. Heating of the grill plates

to the set temperature is signalled by indicator A12. At the end of the set time asound is made and

the grill turns off automatically. Indicator A11 will dim and indicator A12 will turn off completely.

■ After preheating the grill plates, set the desired time using the timer A6, and set the temperature

control knob A13 based on the type of food that you are grilling. The timer A6 can be set in

5-minute intervals in the range from 0 to 30 minutes. The temperature control knob A13 can be

used to set four different temperature levels.

TEMPERATURE CONTROL KNOB SETTINGS TEMPERATURE

0 off

1 – “LOW” (low temperature) 80–120 °C

2 – “MED” (medium temperature) 120–160 °C

3 – “HIGH” (high temperature) 160–200 °C

4 – “SUPER HIGH” (maximum temperature) 200–240 °C

■ The timer A6 counts down the set time and the temperature control knob A13 displays the selected

temperature level. The temperature can be adjusted as required while grilling.

Grilling with the top plate tilted down

■ Tilt open the top plate A2 so that it is in avertical position. Use the handle A7 to tilt out the plate.

Place meat, vegetables, asandwich or other food that you wish to grill or bake in on to the bottom

plate A3. Use the handle A7 to tilt down the top plate A2. Regularly check on the condition of

the meal while grilling. If you do not wish the top plate A2 to lie on the food, adjust its height

as described in chapter Locking and unlocking the grill plates and setting the height of the top

griddle plate.

Grilling on an open grill

■ The unique design of the contact grill enables both grilling surfaces to be used at the same time. Tilt

open the top griddle plate A2 so that it is level with the bottom grill plate A3 as described in chapter

Locking and unlocking the grill plates and setting the height of the top griddle plate.

■ Place meat, vegetables or other food suitable for grilling on to the grill plates. Turn the food over

as required while grilling.

Note:

The grill plate heating indicator A12 turns on and off intermittently during operation. This

signalises that the set temperature is being maintained.

■ At the end of the set time asound is made and the grill turns off automatically. Indicator A11 will

dim and indicator A12 will turn off completely. Set the temperature control knob A13 to position

0 (off).

■ Remove the cooked meal from the grill plate. For this purpose, use heat-resistant wooden, silicone

or plastic kitchen utensils. Do not use metal tongs, metal spatulas, knives or other sharp metal

kitchen utensils. This could cause damage to the non-stick coating of the grill plates.

■ After you have finished using the appliance, ensure that the timer and temperature control knob

are set to position 0 (off), and that the power cord is disconnected from the power socket. Allow the

grill to cool down before handling it again in any way.

TIPS FOR GRILLING MEAT

■ To achieve optimal results, cut meat into slices to athickness where the top griddle plate rests on

them when tilted down.

■ We do not recommend using the contact grill for grilling meat with thick bones, such as bone-in

pork chops.

■ Do not salt the meat before grilling. This would result in the meat being tough and dry.

■ Before grilling marinated meat, pat it down with paper towels to remove excess marinade. Some

marinades have ahigh sugar content, which may burn on to the grill plates.

■ To avoid juices from escaping, do not puncture the meat with aknife or fork. Otherwise the meat

will be tough and dry.

■ Do not dry out the meat by grilling it for too long.

■ Always make sure that chicken meat is thoroughly cooked.

■ When the meat has finished grilling, season it with salt or other seasoning.

■ You do not have to prick pre-cooked hot dogs before grilling them.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SBG 5000 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sencor SBG 5000

Sencor SBG 5000 User Manual - Dutch - 6 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SBG 5000 Manual

Product: