758878
4
Zoom out
Zoom in
Previous page
1/12
Next page
EN-4
EN
Contact Grill
SBG 2050SS / SBG 2051BK / SBG 2052RD / SBG 3050SS / SBG 3051BK / SBG 3052RD
2015 08/2015
When the appliance is in operation, it must be placed on a heat
resistant surface and sufficient space for circulation must be
provided above the appliance and on all its sides. Use the
appliance at a sufficient distance from flammable materials
such as curtains, kitchen towels, etc.
When the appliance is in operation, the temperature of
accessible surfaces may be higher. Accessible surfaces remain
hot for some time after the appliance is turned off. Take care
not to touch the hot outer stainless steel surface or the grill
plates. Use the handle to tilt open the top grill plate.
This symbol on the product means: "Attention: Hot surface."
Always disconnect the appliance from the power socket when
you leave it without supervision or when not using it and
before moving or cleaning it.
Before moving, cleaning or handling it in any other way, allow
the appliance to cool down. Before moving it, remove all food
and liquids from the grill plates and empty out the drip tray.
Be especially careful when handling the drip tray containing
hot liquid.
Clean the surface of the grill plates after each use according to
the instructions in chapter Cleaning and maintenance.
To prevent potential injury by electric shock, do not submerge
any part of the appliance in water or any other liquid.
Do not disconnect the appliance from the power socket by
pulling on the power cord. This could damage the power cord
or the power socket. Disconnect the cord from the power
socket by gently pulling on the plug of the power cord.
It is forbidden to use the appliance if it has a damaged power
cord. If the power cord is damaged, have it replaced at
a professional service centre.
Do not use the appliance if it is damaged, not working
correctly, if it has been dropped on the floor or submerged
in water. In order to prevent a hazardous situation arising, do
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SBG 3050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SBG 3050 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info