758877
8
Zoom out
Zoom in
Previous page
1/12
Next page
EN-8
EN
Contact Grill
SBG 2050SS / SBG 2051BK / SBG 2052RD / SBG 3050SS / SBG 3051BK / SBG 3052RD
2015 08/2015
B
Note:
The lock will be re-engaged when the top plate A6 is tilted down to the vertical position or
when tilted on to the bottom plate A7. This is signalled by button A4 sliding out, which is
accompanied by an audible click.
Set the angle of the bottom grill plate A7. Fold out the feet A9 to set the angle of the bottom
grill plate A7 to enable better drainage of fat and juices into the drip tray A8. The bottom plate
A7 will be tilted slightly backwards. If you leave the fold-out feet A9 folded in, the bottom plate
A7 will be in a horizontal position.
Check that the drip tray A8 is correctly inserted in the underside of the grill. To ensure that liquids
are drained from the top plate A6 into the drip tray A8, the drip tray A8 must be pushed all the
way in to the underside of the grill.
Smear the grill plates A6 and A7 with a small amount of vegetable oil that is suitable for cooking.
Fully wind out the power cord and connect the grill to a power socket. Connection to a power
socket is signalled by the "Power" indicator A2 being lit.
Allow the grill plates A6 and A7 to preheat. Upon reaching the operating temperature, the
"Ready" indicator A3 will be lit. The grill is now ready for use
Place meat, vegetables or other food suitable for grilling on to the grill plates A6 and A7. When
grilling food, flip it over as required and regularly check the capacity of the drip tray A8.
Note:
You may see a small amount of smoke when you turn on the grill for the first time. This is caused
by certain components being heated up for the first time. This need not disturb you.
During operation, the "Ready" indicator A3 will intermittently turn on and off. This signalises
that the operating temperature is being maintained.
Attention:
Be especially careful when handling the drip tray A8 containing hot liquid.
When the food is cooked, use a plastic or wooden spatula to remove it from the grill plates A6 and
A7. Do not use metal tongs or metal spatulas, knives or other sharp metal kitchen utensils. This
could cause damage to the non-stick coating of the grill plates A6 and A7.
When you have finished, disconnect the grill from the power socket and allow it to cool down.
Then clean it out according to the instructions in chapter Cleaning and maintenance.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SBG 2052 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SBG 2052 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info