684995
11
Zoom out
Zoom in
Previous page
1/25
Next page
EN 9
EN
Revision 06/2016Copyright © 2016, Fast ČR, a. s.
Getting started
3. Getting started
3.1. Inserting SIM and memory cards
A SIM card must be inserted into the phone before it is first used. Your telephone operator
will provide the SIM card.
When purchasing services from the mobile network, you receive aSIM card together with
details including your PIN code and the optional services that are available.
NOTICE:
Do not bend the SIM card and prevent it from being scratched. Do not expose
the SIM card to static electricity, water and dirt. When inserting and removing
SIM cards and the memory card, be careful not to damage the slots and base
plate of the telephone.
WARNING:
Prior to handling cards (SIM and memory) unplug the charger, switch the phone
off and remove the battery.
To open the back cover, lift it with your fingernail or ablunt object at the lower edge at
the location of the cut-out. Gradually release the cover around the entire perimeter of the
phone.
Lift the battery with afingernail or ablunt object at the bottom edge in the place of the
cut-out.
Insert the SIM card in the appropriate slots with contacts facing downwards so that the
contacts on the SIM card touch the built-in SIM contacts in the phone. Insert the SIM card
1 into the left slot by the skewed corner located in the upper left corner of the slot; insert
the SIM 2 card into the right slot by the skewed corner located in the upper left corner of
the slot.
Insert the memory card into the slot located in the right lower corner of the area under the
battery. Insert the memory card with the contacts facing downward so that the memory
card contacts touch the built-in contacts for the memory card in the telephone and the
edge of the memory card with cuts is facing the lower edge of the area for the battery.
NOTICE:
If the memory card does not work, make sure it is properly installed and has goof
contact. The maximum size of supported memory cards is 8 GB.
Element P005V EN CZ SK HU PL.indb 9 30.06.2016 10:34:08
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor Element P005V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor Element P005V in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info