476173
15
Zoom out
Zoom in
Previous page
1/29
Next page
English
SPH10
again.
If this feature is disabled, the only way to initiate and terminate
an intercom conversation is to tap the Jog Dial.
1. Press and hold the Jog Dial for 8 seconds until the red LED
turns on solidly. When you do this, after first 5 seconds you
press the Jog Dial, you will see the headset enters into the
Intercom Pairing sequence, but you have to keep pressing the
Jog Dial for another 3 seconds until the LED turns to solid red.
2. To enable, tap the Jog Dial, then the blue LED flashes for 2
seconds and you will hear double beeps.
3. To disable, tap the Phone button, then the red LED flashes
for 2 seconds and you will hear a single beep.
However, even when this feature is enabled, if you terminate
intercom conversation manually by tapping the Jog Dial,
you cannot start intercom by voice temporarily. In this case,
you have to tap the Jog Dial to restart the intercom. This is
to prevent repeated unintentional intercom connections by
strong wind noise. If you tap the Jog Dial to start intercom
conversation, it is not terminated by 20 seconds of silence.
After turning SPH10 off and on, you can start intercom by
voice again.
Tip:
The Jog Dial is for any kind of Intercom related function, and
the Phone Button is for any functions of mobile phone. With this
reason, as far as intercom function is concerned, the Jog Dial
is used for a positive manner of action such as enabling, and
the Phone Button is for a negative manner of action such as
disabling. Vice versa for the mobile phone functions.
• Intercom Failure
When you try to start an intercom conversation with an
Intercom Friend who is already having a 3-way conference
intercom with other persons or a mobile phone call, you will
hear a low tone double beep signifying a busy signal. In this
case, you have to try again later.
• Intercom Reconnection
If your Intercom Friend goes out of range while having an
intercom conversation, you may hear static noise and
14 15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sena SPH10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sena SPH10 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sena SPH10

Sena SPH10 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info