English
SMH5
13
EnglishEnglish
If you have a MP3 stereo music phone such as a smartphone,
sometimes you may need to selectively use the SMH5 for A2DP stereo
music only or for mobile phone handsfree only. This instruction is for
advanced users who want to pair the SMH5 to their s martphones
only with one selective profile: A2DP for stereo music or HFP for
phone call.
If you have previously paired a mobile phone to the SMH5, you must
clear the previous paring list on both devices; the mobile phone
and SMH5. To clear the pairing list on SMH5, please do a factory
reset described on the page 19.To clear the pairing list on the
mobile phone, please refer to the mobile phone manual. For most
smartphones, delete the Sena SMH5 from the list of Bluetooth devices
in setting menu.
7.1 A2DP Stereo Music Only
1. Turn on the headset and press the Phone Button for 5 seconds
until the LED flashes red and blue alternately and you hear multiple
beeps.
2. Within 2 seconds, tap the Jog Dial again, then the LED turns to
red flashing and the beeps turn to double mid-tone beeps. You will
hear a voice prompt saying “Media selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select the Sena
SMH5 in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some smartphones may not ask for PIN.
7.2 HFP for Phone Call Only
1. Turn on the headset and press the Phone Button for 5 seconds
until the LED flashes red and blue alternately and you hear multiple
beeps.
2. Within 2 seconds, tap the Phone Button again, then the LED turns
to blue flashing and the beeps turn to multiple mid-tone beeps. You
will hear a voice prompt saying “Phone selective pairing”.
3. Search for Bluetooth devices on your smartphone. Select the Sena
SMH5 in the list of devices detected on your phone.
4. Enter 0000 for the PIN. Some smart phones may not ask for PIN.
7. PAIRING WITH SELECTIVE PROFILE:
A2DP STEREO OR HANDSFREE
