476171
6
Zoom out
Zoom in
Previous page
1/28
Next page
SMH10
6
3. If you have any problem to clamp the Speaker-Microphone unit on the helmet
for any reason, you may use the glued surface mounting adaptor to attach the
Speaker-Microphone unit on the external surface of the helmet.
• Remove the back plate of the Speaker-Microphone clamp unit by loosening the
two screws with the enclosed Hex Key.
Attach the glued external adaptor to the Speaker-Microphone clamp unit by
tightening the two screws instead of the removed back plate.
Locate a proper surface on the helmet to attach the unit, clean the helmet surface
location with a moistened towel, and allow to dry thoroughly.
Peel off the cover of the adhesive tape of the adaptor and attach the unit on the
proper surface of your helmet.
Sena recommends the clamp unit over the glued surface mounting adaptor. Even though
the glued surface mounting adaptor is provided for convenience, Sena does not assume
any responsibility for use of it. Users may have to use the glued adaptor at their own risk
and responsibility.
Warning:
4. Attach the headset main unit to the Speaker-Microphone clamp unit. Insert the
bottom part of the main unit completely into the lower slot of the clamp unit first.
Then push the upper part of the main unit until it clicks into the upper holder of
the clamp unit.
Attach
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sena SMH10 snowmobile at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sena SMH10 snowmobile in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info