528664
40
Zoom out
Zoom in
Previous page
1/68
Next page
-34-
NOTE:
5. Measurement
Reference:
Refer to the radio Receiver or Transceiver instruction manual for the recommended operating
method.
Maximum distance of the wireless flash radio triggering system can vary depending on the
placement of the remote Receiver or Transceiver, direction of the radios antenna, distance
from a large body of water or concrete wall and other possible factors.
1. Confirm the range between the meter (transmitter) and Receiver or Transceiver.
2. Place the meter and Receiver or Transceiver away from large metal objects, concrete,
objects, large moisture content (both people and trees fall into the category) and so
forth.
3. Secure the radio Receiver or Transceiver in place by using Velcro tape or a 1/4-20
mounting screw. Be sure that the entire length of the Receiver or Transmitter antenna
is higher than the flash pack. Avoid contact between the Receiver or Transceiver
antenna and metal objects at all times.
4. Depending on the location, there may be cases when the Receiver or Transceiver is
incapable of receiving any radio signals whatsoever. There are several possible causes
for this such as radio signals reflected off of nearby objects. This can generally be
resolved by shifting the meter (Transmitter) or the Receiver or Transceiver slightly in
one direction or another. In addition, confirm that the Receiver or Transceiver is not
placed behind objects that readily absorb or deflect radio signals such concrete, metal,
low hills, etc.
Be sure to picture either RT-32CTL or RT-32N / RT32-FCC / RT-32CE according to your
receiver’s/transceiver’s type.
RT-32CE/FCC and RT-32N can trigger them.
(1)If these ControlTL receivers/transceivers are set in Standard channel mode.
as well as the differences between Standard and ControlTL systems.
* Pleas visit pocketwizard.com to learn more about PocketWizard ControlTL radios
®
®
®
Compatible
NOT Compatible
®
®
FlexTT5, PowerST4 and PowerMC2
PLUS series and MultiMAX
For Standard channel triggering
For Standard channel triggering ONLY
RT-32FCC
RT-32CE
RT-32N
RT-32CTL (NEW)
For both Standard and ControlTL
channel triggering
For both Standard and ControlTL
channel triggering
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-758D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-758D in the language / languages: English as an attachment in your email.

The manual is 9,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sekonic L-758D

Sekonic L-758D User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info