528665
14
Zoom out
Zoom in
Previous page
1/68
Next page
-8-
5. Auto Power Off function
1. To conserve battery power, the meter will turn off about twenty minutes after last use.
2. Whether the Auto Power Saving feature turns the power off or the Power button is pressed,
the settings and measured values remain stored in memory. When the Power button is pressed
again the last settings are displayed.
Reference:
The power shuts off automatically after 1 minute when the power button is pressed and held.
Auto power off time is adjustable in Custom settings. (See page 40 for details)
6. Setting ISO 1 sensitivity
1. Hold down the ISO1 button and turn the Jog wheel
to select the desired ISO sensitivity.
2. You can also change the ISO sensitivity after taking
measurements. The new value is automatically
displayed.
7. Setting ISO 2 sensitivity
1. This feature is useful when using a different ISO
sensitivity (film or digital), Polaroid proofing film, or for
exposure correction (when using a filter, extension
tubes, bellows factor or another camera etc.).
2. Hold down the ISO 2 button and turn the Jog wheel
to select the desired ISO sensitivity.
3. Once this is set, after taking a measurement, the mea-
sured value for the second ISO sensitivity will be dis-
played when the ISO 2 button is pressed.
4. You can also change the second ISO sensitivity after
taking measurements. The new value is automatically
displayed.
3. Before Using
4. Replacing the battery during measurement or when using the memory function
1. Always turn the power OFF before replacing the battery. If the battery is removed with the
power ON, measurements and settings in memory can no longer be recalled.
2. If after replacing the battery, or during measurements, strange screens (displays that have not
been set) appear on the LCD, or nothing happens, no matter what button is pushed, remove the
battery and wait at least ten seconds and then replace the battery. This allows the software to
automatically reset.
WARNING:
Never place batteries in fire, short, disassemble, or heat them. The batteries might break
down, and cause an accident, injury or pollute the environment.
Reference:
The following settings are possible when using custom setting function P44.
1. It is possible to set ISO 2 for Filter compensation. These values can be set within a range of
±5 EV in 1/10 steps and are display in the ISO 2 area.
2. Filter factor number compensation enables you to set seven types of filters frequently used
in the CINE industry. (Kodak Wratten Filters)(L-758CINE only)
NOTE:
A three second pause between power on and off is recommended to avoid damage to
the meter.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-758 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-758 in the language / languages: English as an attachment in your email.

The manual is 9,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info