528682
40
Zoom out
Zoom in
Previous page
1/52
Next page
-36-
6. Advanced Functions
6. Upon setting the channel and sub-channels, press Measuring button !4 to set radio triggering
mode automatically, or the Wireless flash radio triggering mode or Wireless multiple flash radio
triggering mode is selected using the Jog wheel while the Mode set button is pressed. For other
settings of the measurement, see page 17.
7. Confirm that the meter and the radio receiver are set to the same channel number. The flash
unit will fire when the measurement button of the meter is pressed and measurements can be
made at the same time.
Reference:
Refer to the receiver instruction manual for the receiver operating method.
Maximum controllable distance of the radio flash trigger system differs depending on the
placement of the device, direction and other factors.
1. Confirm the direct visible range between the transmitter and receiver.
2. Place the meter and receiver away from large metal objects, concrete, objects with
large moisture content (both people and trees fall into the category) and so forth.
3. Secure the radio receiver in place by using Velcro tape or mounting 1/4-20 thread.
Be sure that the entire length of the receiver antenna is higher than the flash pack at
this time. Avoid contact between the receiver antenna and metal objects at all times.
4. Depending on the location, there may be cases when the receiver is incapable of
receiving any radio signals whatsoever.
There are various possible reasons for this such as radio signals reflected from nearby
objects. This can generally be resolved by shifting the device slightly in one direction
or another.
In addition, confirm that the device is not placed behind objects that readily absorb or
deflect radio signals such concrete, metal, low hills, etc.
NOTE:
The radio flash system may be used only in countries where a permit for the control
frequency has been issued by the government office in charge.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-558 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-558 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sekonic L-558

Sekonic L-558 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info