528662

Sekonic L-478DR Manual

51
Zoom out
Zoom in
Previous page
1/72
Next page
51
6-5. Filter Compensation Function
The L-478’s lter compensation system uses industry-standard lter naming to
introduce lens and light source ltration to the meter. It also enables entering favorite
lter names and values to customize meter to your shooting needs. Up to four lters
can be used as a pack with the exposure display compensated for all.
A lter Icon
will appear at the top of the Measuring display screen whenever a lter
factor is being used.
6-5-1.
Setting Filter Numbers and Compensation Values
These can be set in steps of 0.1 EV at a range of
±5.0EV.
1. Touch the Tool Box icon (
) at the bottom
of the screen to open the Tool Box screen.
2. Touch the
[Filter Compensation] to display
the Filter Compensation Setting screen.
3. Touch the radio button of
[Input Filter
Comp. Value] to display the keypad on Input
Filter Comp. Value.
4. Touch numbers on the keypad to input the
transmission loss amount in EV (stops) (See
P12 for details) and the value will appear in a
box at the top of the display. Touch the
[OK]
to enter the compensation amount and return
to the Filter Compensation Setting screen
where the compensation amount will appear
next to the to the Input Filter Comp Value
indication.
5. Touch
[OK] at the bottom of the screen to
return to Measurement Screen to start taking
readings with entered lter factor.
<

Pluscompensationwillcauseoverexposureinshootingand
minuscompensationwillcauseunderexposure.Useminus
compensationvalueforltercompensation.
Tool Box Screen
Filter Compensation
Setting Screen
Current lter
compensation
value
Filter Value Setting Screen
… 51 …


Need help? Post your question in this forum.

Forumrules
1

Forum

sekonic-l-478dr

Reset search

  • Sekonic L478 DR
    The CH/ZONE setting is greyed out making it unavailable to set channel or zone. I have tried different settings in custom etc but not working. The unit it's new.
    Anyone know the answer? Submitted on 16-1-2022 at 06:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-478DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-478DR in the language / languages: English as an attachment in your email.

The manual is 8,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sekonic L-478DR

Sekonic L-478DR User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info