528669

Sekonic L-308BII Manual

9
Zoom out
Zoom in
Previous page
1/15
Next page
NOTE
0 If you press the mode selector in the ambient light measurement mode while
holding down the IS0 button, the display is toggled between EV and F values
(Fig. 12 and 13). If it is toggled after measurement, the measurement data is
automatically recalculated and redisplayed.
Fig. 12 Fig. 13
5.5
Setting up film speed
(ISO)
0
Press the IS0 button, and a film speed value is
displayed (Fig. 14).
@ Set up the film speed by pressing the Up or Down button
while holding down the IS0 button. If you press the Up Fig. 14
button, the speed increases; if you press the Down button it decreases. If you hold down the
Up/Down button for more than one second, the speed changes continuously.
NOTE
l You can set up the film speed either before or after measurement.
5.6
Setting up shutter speed (T)
Set up the shutter speed used by pressing the Up or Down
button (Fig, 15). If you press the Up button, the speed
increases; if you press the Down button it decreases.
If
YOU hold down the Up/Down button for more than one
second, the speed changes
contrnuously
Fig. 15
NOTES
r
@in
the case of ambient light, you can set up the shutter speed in a range of 60 and
1/8000 sec.
@
In the case of flash light, you can set up the synchronizing shutter speed in a range
of 1 and 1/500 sec.
After 1/500 see, 1/75 1/80 1/90, and 1/100 sec. are displayed in order. You can
select any one you want.
5.7
Setting up number of frames per
second (f/s)
The film frame counts are displayed after 1/8000 set of
shutter speed in the ambient light mode. Choose any count
you want (Fig. 16).
Fig 16
NOTES
l The f/s count options are: 8, 12, 16, 18, 24, 25, 30, 32, 64, and 128. These values
represent those used with the shutter angle 180 degrees.
l This setting up is used for a motion picture camera only.
6
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-308BII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-308BII in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info