757543
14
Zoom out
Zoom in
Previous page
1/17
Next page
Two-piece foldover portion of
the Diver Extender
Upper cover of the Diver Extender
Flap
(5-2) Clasp
(5-1)
3Open the two-piece foldover
portion of the Diver Extender in
the direction of the arrow.
Some force is required to open the
foldover portion, and it will click when
it is opened.
4Slide the upper cover of the
Diver Extender in the direction
of the arrow, and then, pull it up
to extend the two-piece
foldover portion to the full
extent.
5Place the watch on your wrist,
and close the clasp (5-1) first
and then, the flap (5-2).
* To fold up the Diver Extender, reverse the
procedure above. When the two-piece
folder portion of the Diver Extender is
folded up completely, it also clicks in the
same manner as when it is opened.
EN 48
5
TO PRESERVE THE QUALITY OF YOUR
WATCH
After sales service
Notes on guarantee and repair
Contact the retailer from whom the watch was purchased or SEIKO CUSTOMER SERVICE CENTER
for repair or overhaul.
Within the guarantee period, present the certificate of guarantee to receive repair services.
Guarantee coverage is provided in the certificate of guarantee.
Read carefully and retain it.
For repair services after the guarantee period has expired, if the functions of the watch can be restored
by repair work, we will undertake repair services upon request and payment.
Replacement with functional parts
Please keep in mind that if original parts are not available, they may be replaced with substitutes whose
outward appearance may differ from the originals.
EN 49
5
TO PRESERVE THE QUALITY OF YOUR
WATCH
Inspection and adjustment by disassembly and cleaning (overhaul)
Periodic inspection and adjustment by disassembly and cleaning (overhaul) is recommended
approximately once every 3 to 4 years in order to maintain optimal performance of the watch for a long
time. According to use conditions, the oil retaining condition of your watch mechanical parts may
deteriorate, abrasion of the parts may occur due to contamination of oil, which may ultimately lead the
watch itself to stop.
As the parts such as gasket may deteriorate, water-resistant performance may be impaired due to
intrusion of perspiration and moisture.
Please contact the retailer from whom the watch was purchased for inspection and adjustment by
disassembly and cleaning (overhaul). For replacement of parts, please specify “SEIKO GENUINE
PARTS.” When asking for inspection and adjustment by disassembly and cleaning (overhaul), make
sure that the gasket and push pin are also replaced with new ones.
When your watch is inspected and adjusted by disassembly and cleaning (overhauled), the movement
of your watch may be replaced.
bCAUTION
Depending on the environment where a diver’s watch is used, its inner parts or movement
as well as its case or band may be affected. We recommend that you have your watch
overhauled regularly once every 3 or 4 years.
EN 50
5
TO PRESERVE THE QUALITY OF YOUR
WATCH
Setting the stopwatch hands (1/5-second and minute
hands) to the preliminary position
If any of the stopwatch hands do not return to the 0 minute 0 second position when the stopwatch
is reset, the preliminary hand position may be misaligned.
The preliminary position of the stopwatch 1/5-second and minute hands is 0 minute 0 second.
Adjusting the hands to the preliminary position will ensure that stopwatch measurements are
correct.
The preliminary position may be misaligned due to the following reasons.
In the case of a strong impact: Misalignment may occur when dropping or hitting the watch.
In the case of a magnetic influence: Misalignment may occur when bringing the watch close to an object
which generates magnetism.
“Examples of common magnetic products that may affect watches” → P. 42
* If the preliminary position adjustment is carried out, the watch gains or loses time. After adjusting the preliminary
hand position, make sure to reset the main time.
EN 51
6
TROUBLESHOOTING
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko V192 Diver at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko V192 Diver in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seiko V192 Diver

Seiko V192 Diver User Manual - German - 16 pages

Seiko V192 Diver User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info