●Two timers are available for use either individually or in combination. When used together, Timer 2 starts counting down as soon as Timer 1 has finished
counting down the set time. They repeat their respective countdown cycles alternately as many times as necessary unless stopped.
●Each Timer 1 and Timer 2 can be set for any desired amount of time from 10 seconds up to 99 hours, 59 minutes and 59 seconds inone-second increments.
●To use either Timer 1 or Timer 2 as a standard repeat timer, set the timer not in use to “00:00’00.”
●The number of times that the timers repeat their countdown cycles can be set from 1 to 100 times. If “---“ is set for the number of repeating times, the timers
will automatically start over a new counting until stopped by the user.
A
Number of times
the countdown is
to be repeated
B
D
Timer 1
Timer 2
Number of times
the countdown
was repeated
TIMER SETTING
Press to show the TIMER display.
▼
D
BPress and hold for 2 seconds to show the TIMER SETTING display.
▼
CPress repeatedly to select the digits (flashing) to be adjusted.
*The HOUR digits for Timer 1 start flashing.
▼
APress to set the flashing digits.
*The digits move quickly if Button A is kept pressed.
*By pressing Button D while the digits are flashing, both of the timers and the number of times the
countdown is to be repeated will be reset to “00:00'00"” and “000,” respectively.
B
▼
After all the adjustments are completed, press to return to the TIMER display.
C
HOUR
(TIMER 1)
MINUTES
(TIMER 1)
SECONDS
(TIMER 1)
HOUR
(TIMER 2)
MINUTES
(TIMER 2)
SECONDS
(TIMER 2)
NUMBER OF TIMES THE
COUNTDOWN IS TO BE REPEATED
●
The timers cannot be set for a time less than 10 seconds. If a time less than 10 seconds is set and Button B is pressed to return to the TIMER display, the timers
will automatically be set to “00:00'10".”
How to use the timer
●
To stop the time-up warning beep and time-up beep while sounding, press either Button A, B, C or D. This will not affect the time-up beeps for the subsequent
countdown cycles.
●
The time-up beeps of Timer 1 and Timer 2 sound in different tones.
●
Restarting and stopping the timer can be repeated as many times as necessary by pressing Button C.
Press Button C to start
Timer 1.
C
mark flashes during
the countdown.
A time-up warning beep
for Timer 1 sounds 3
seconds before the set
time is up. When the set
time is up, time-up beep
for Timer 1 sounds for 5
seconds.
TIMER 2 starts
counting down.
A time-up warning beep
for Timer 2 sounds 3
seconds before the set
time is up. When the set
time is up, time-up beep
for Timer 2 sounds for 5
seconds.
TIMER 1 starts counting
down.
In this way, both the timers repeat the countdown the number of times you have set,
showing the number of times the countdown has been completed on the display.
AUTOMATIC SHUT-OFF FUNCTION
▲
When the automatic shut-off function is set to “ON” in the TIME/CALENDAR SETTING display, the following energy-saving functionswill be activated to help
extend the battery life.
●Regardless of the display modes, when the stopwatch is left untouched for one hour, the display becomes blank in order to minimize battery consumption.
●The current time will be displayed once every 10 seconds even while the display is blank, to indicate that the blank display isnot caused by battery exhaustion.
●While the stopwatch or timer is measuring, the display will not become blank for the energy-saving functions.
●To return to the normal display, press either Button A, B, C or D. The last display before it became blank will be shown.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Seiko S056 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Seiko S056 in the language / languages: English as an attachment in your email.
The manual is 1,48 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
