In the following cases, the hand position data stored in the built-in IC and the positions the hands actually point to do not correspond with each other.
Follow the procedure below to adjust the hand position.
1)The hands do not point to the proper positions, being affected by strong shocks, magnetism, etc.;
2)The hands do not indicate the time properly after the time synchronization via Bluetooth communication; and
3) After Bluetooth communication, the second hand does not indicate the reception result, "Y" or "N," properly.
④
After the second hand position adjustment is completed, press Button
Ⓑ
.
The minute hand moves to indicate that it is ready for hand
position adjustment.
⑤
Press ButtonⒶor Ⓒto set the minute hand to the 12 o’clock position.
※
With each press of Button Ⓐor Ⓒ, the minute hand advances or moves back,
respectively. It moves quickly if the respective buttons are kept pressed.
⑥
After the minute hand position adjustment is completed, press Button Ⓑ.
The hour hand moves to indicate that it is ready for hand position adjustment.
⑦
Press ButtonⒶor Ⓒto set the hour hand to the 12 o’clock position.
※
With each press of Button Ⓐor Ⓒ, the hour hand advances or moves back,
respectively. It moves quickly if the respective buttons are kept pressed.
⑧
After the hour hand position adjustment is completed, press Button
Ⓑ
.
The hand position adjustment function is deactivated, and
the display returns to the time.
If the watch is left untouched for 3
minutes, the hand position adjustment function is also deactivated,
and the hand position you have set is registered.
[ TIME mode ]
Set
hour hand
[ Minute hand position
adjustment ]
[ Hour hand position
adjustment ]
[ Second hand position
adjustment ]
Set
minute hand
Set
second hand
Button Ⓐ
Button Ⓒ
Press and hold both
Buttons ⒶandⒸ
at the same time
for more than
10 seconds
Press and hold both
Buttons ⒶandⒸ
at the same time
Press to
move back
Press to
advanceButton Ⓑ
Button Ⓑor returns automatically in 3 minutes
Button ⒶButton ⒶButton Ⓐ
Press to
advancePress to
advance
Button ⒷButton Ⓑ
Button ⒸButton Ⓒ
Press to
move back
Button Ⓑ
Button Ⓑ
■Operation Method
①Press Button
Ⓑ
to change the mode to TIME.
※While the 3-min timer is counting, the hand position adjustment
procedure cannot be carried out. Stop or reset the timer (see P. 17).
②
Press and hold both ButtonsⒶand Ⓒat the same time for more than
10 seconds. The hand position adjustment function is activated, and all
the hands move toward the 12 o’clock position. Then, the second hand
turns a full circle to indicate that it is ready for hand position adjustment.
If any of the three hands do not point to the 12 o’clock position exactly,
follow the procedure below to set it to the 12 o’clock position.
※While
Buttons
Ⓐand
Ⓒ are kept pressed to activate the hand position
adjustment function, the minute hand setting display of the manual
time setting function appears temporarily. Be sure to keep the button
pressed for more than 10 second until all the hands move toward the
12 o’clock position. (Refer to “How to Adjust Time Manually” on P. 14.)
③Press Button
Ⓐ
to set the
second hand to the 12 o’clock position.
※The second hand moves quickly if Button Ⓐ is kept pressed.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Seiko N851 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Seiko N851 in the language / languages: English as an attachment in your email.
The manual is 1,6 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
