Manual Seiko 9S86 (page 13 of 25) (English)

757452

Zoom out

Zoom in

1/25

HOW TO USE (FOR CAL. 9S86, 9S66)

How to wind the mainspring

○ This watch is an automatic winding type (with manual winding function).

○ The mainspring can be sufficiently wound automatically by natural movement of the arm

while normally worn on the wrist. In addition, it can be wound by turning the crown.

○ A stopped watch can be started by arm movement when it is worn on the wrist, however,

before wearing the watch, wind the mainspring sufficiently and set the time and date. When

winding the mainspring, turn the crown at the normal position clockwise (12 o’clock

direction) slowly. If you turn the crown counterclockwise (6 o’clock direction), it will turn

free.

The mainspring is sufficiently wound when the crown is turned approximately 45 times for

Cal. 9S86 and 60 times for Cal. 9S66. When the mainspring is in the full-winding state, it

is designed so that the mainspring slips if it is overwound. Therefore, it is not necessary to

worry about breaking the mainspring, however, please refrain from excessive operation.

* It is recommended that you wear the watch on your wrist more than 10 hours a day to keep

the mainspring wound up. If the mainspring is not wound up sufficiently, the watch may

lose or gain time. If you do not wear the watch on your wrist, wind the mainspring up

sufficiently by turning the crown by hand every day at a fixed time.

How to set the time and date

○ To set the time and date, set the 24-hour hand and minute hand first, and then set the hour

hand and date.

○ When setting the time, make sure that the mainspring is sufficiently wound.

How to set the time

1Make sure that the mainspring is sufficiently wound and the watch is working.

* When setting the date and time, ensure that the watch is working.

Normal position

First click

position

Second click

position

2Unlock the crown.

“Screw down crown”→ P. 18

3Pull out the crown to the second click

when the seconds hand is pointing at

the “0” second position. The seconds

hand will stop on the spot.

22 HOW TO USE

HOW TO USE (FOR CAL. 9S86, 9S66)

Set the 24-hour

hand and

minute hand.

Normal position

First click position

Second click

position

First click position

4Turn the crown counterclockwise (6

o’clock direction) to rotate the 24-

hour hand and minute hand

clockwise and set them to the current

time.

While doing so, set the minute hand

a few minutes behind the correct

time, and then slowly advance it to

the desired time.

* Only the 24-hour and minute

hands are to be set first. Even if

the hour hand is indicating

incorrect time, or the date may be

altered depending on the

position of the hour hand, it is not

necessary to make an

adjustment at this stage.

5Push the crown back in

simultaneously with the time signal.

* The setting of the 24-hour,

minute and seconds hands is

now completed.

6To move on to the hour hand and

date setting, pull out the crown to the

first click.

7Turn the crown to set the hour hand.

While turning the crown, the moment

the date changes is midnight. When

setting the hour hand, be sure that

AM/PM is set correctly.

Set the date also at this point if

necessary.

* The crown can be turned in either

direction to set the date,

however, it is recommended to

turn the crown in the direction

which enables you to set the date

with a smaller adjustment.

* Turn the crown slowly, checking

that the hour hand moves in one-

hour increments.

* When setting the hour hand, the

other hands may move slightly.

However, this is not a

malfunction.

HOW TO USE

HOW TO USE (FOR CAL. 9S86, 9S66)

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 9S86 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seiko 9S86

Seiko 9S86 User Manual - German - 25 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Seiko 9S86 Manual

Product: