757449
11
Zoom out
Zoom in
Previous page
1/25
Next page
HOW TO USE
Crown
There are two types of crowns, the regular one and one that can be locked.
Please confirm the crown of the watch that you are using.
While pressing
the crown in, turn
it in the direction
indicated by the
arrow.
The crown
turns.
The crown
does not
turn.
Normal crown
Pull out the crown and operate it.
Screw down crown
Unlock the crown
before operating it.
After operating the
crown, lock it.
Unscrew
Rotate while
pressing
the crown in.
* By locking the crown by screw, a
screw down crown can prevent
malfunction and increase water
resistance.
* Be careful not to screw the crown
in by force as it may damage the
slots of the crown.
* Turn the crown from time to time. → P. 41
Screw down crown
The screw down crown features a mechanism that can securely lock the crown when
it is not being operated in order to prevent any operational errors and to improve its
water resistant performance.
It is necessary to unlock the screw down crown before operating it.
Once you have finished operating the crown, make sure to relock it.
To unlock the crown
Turn the crown counterclockwise (6 o’clock
direction) to unscrew it. Now the crown can be
operated.
To lock the crown
Turn the crown clockwise (12 o’clock
direction) while gently pressing it in toward the
watch body until it stops.
Crown locked
Unlock the crown
before operating it. Crown unlocked After operating the
crown, lock it.
Unscrew
Rotate while pressing
the crown in.
* When locking the crown, turn it slowly with care, ensuring that the screw is properly engaged.
Be careful not to push it in forcefully, as doing so may damage the screw hole in the case.
18 HOW TO USE
Power reserve indicator
The power reserve indicator lets you know the winding state of the mainspring.
Before removing the watch from your wrist, observe the power reserve indicator to check if
the watch has stored enough power to keep running until the next time you wear it. If
necessary, wind the mainspring.
(To prevent the watch from stopping, wind the mainspring to store the excess power that will
allow the watch to run for extra time.)
Power reserve indicator
* The continuous operating time of the watch may vary depending on the condition of use,
such as the number of hours you wear the watch or the extent of your movement while
wearing it.
* In a case where you wear the watch for a short period of time, observe the power reserve
indicator to check the level of the remaining power. If necessary, manually wind the
mainspring.
How to read the power reserve indicator
Power reserve
indicator
Winding state of
the mainspring Fully wound Half wound Unwound
Number of
hours the watch
can run
Approximately 72 hours
(3 days)
Approximately 36 hours
(1.5 days)
The watch either stops
or is running down.
* This watch is configured so that the spring cannot be over-wound.
Once the mainspring is fully wound, the mainspring slips inside, disengaging the winding
mechanism. When this happens, you can still turn the crown without damaging the watch,
however, please refrain from excessive operation of the mainspring.
19
HOW TO USE
Power reserve indicator
English
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 9S66 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 9S66 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seiko 9S66

Seiko 9S66 User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info