757445

Seiko 9S61 Manual

18
Zoom out
Zoom in
Previous page
1/25
Next page
HOW TO USE (FOR CAL. 9S61)
How to wind the mainspring
○ This watch is an automatic winding type (with manual winding function).
○ The mainspring can be sufficiently wound automatically by natural movement of the arm
while normally worn on the wrist. In addition, it can be wound by turning the crown.
○ A stopped watch can be started by arm movement when it is worn on the wrist, however,
before wearing the watch, wind the mainspring sufficiently and set the time. When winding
the mainspring, turn the crown at the normal position clockwise (12 o’clock direction)
slowly. If you turn the crown counterclockwise (6 o’clock direction), it will turn free.
The mainspring is sufficiently wound when the crown is turned approximately 60 times.
When the mainspring is in the full-winding state, it is designed so that the mainspring slips
if it is overwound. Therefore, it is not necessary to worry about breaking the mainspring,
however, please refrain from excessive operation.
* It is recommended that you wear the watch on your wrist more than 10 hours a day to keep
the mainspring wound up. If the mainspring is not wound up sufficiently, the watch may
lose or gain time. If you do not wear the watch on your wrist, wind the mainspring up
sufficiently by turning the crown by hand every day at a fixed time.
bCAUTION
○ For models with a screw down crown, remember to screw the crown in.
○ Due to its gear train mechanism, for setting the time of the mechanical watch correctly, the
hands should be set back once slightly and then set forward to the correct time.
How to set the time
First click position
1Pull out the crown when the seconds
hand is at the 12 o’clock position.
(The seconds hand stops.)
Turn the crown to set the hour and
minute hands to the desired time.
2Push the crown back in to the normal
position in accordance with a time
signal. The watch starts operating.
32 HOW TO USE
HOW TO USE (FOR CAL. 9S61)
■ FUNCTIONS OF DIVER’S MODEL
Unidirectional rotating bezel
By using the rotating bezel, you can measure the elapsed time since the start of an
event or an activity such as diving.
This watch has a unidirectional rotating bezel. As the evaluation of the remaining air in your
cylinder is based on the information of the elapsed time of the dive, the rotating bezels for a
diver’s watch is designed to rotate only counterclockwise, so that the watch is prevented from
displaying the elapsed time shorter than it actually is.
bCAUTION Make sure that you check the correct remaining amount of air in your
cylinder before diving. Use the display of the elapsed time by the
rotating bezel only as a guide during diving.
How to use the rotating bezel
1At the start of the activity, for which you want to measure the elapsed time (for example,
when you start diving), rotate the bezel so that the mark on the bezel is aligned with
the minute hand.
2Read the graduation on the rotating bezel to which the minute hand is pointing.
【Ex.】 When you start diving at 10:10.
Start of the dive After 15 minutes has elapsed
Align the mark
with the minute
hand
Rotating direction of the
bezel
Elapsed
time
Read the graduation on the
rotating bezel to which the
minute hand is pointing.
33
FUNCTIONS OF DIVER’S MODEL
English
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 9S61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 9S61 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seiko 9S61

Seiko 9S61 User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info