757445

Seiko 9S61 Manual

17
Zoom out
Zoom in
Previous page
1/25
Next page
HOW TO USE (FOR CAL. 9S64, 9S63)
How to wind the mainspring
○ This watch is a manual winding type.
○ In order to wind it up completely, please refer to the following table;
In case the watch is supposed to be
wound up every day.
About 20 turns of the crown will wind up the
watch fully.
In case the watch was not wound up more
than three days.
About 60 turns of the crown will wind up the
watch fully.
○ For Cal. 9S63 models, look at the power reserve indicator to check the winding state
(remaining power).
“Power reserve indicator”→ P. 19
○ From the state of the mainspring being sufficiently wound, it continuously operates for
approximately 72 hours or more.
○ If the mainspring is not wound up sufficiently, the watch may lose or gain time. To attain a
high accuracy, we suggest that the mainspring is wound up fully once a day at a fixed time.
* When the watch is used from a state in which the mainspring is unwound to a stop, it does
not move immediately even if the mainspring is wound with the winding crown. This is
because of the mechanical watch’s feature that the mainspring torque (force) is weak at
the beginning of mainspring winding. The seconds hand starts moving when the
mainspring is wound to reach a certain degree of torque strength, while the watch can be
made to move advance by shaking it to rotate the balance wheel forcibly.
Do not pull out the crown.
(If the watch is equipped with
the screw down crown,
unscrew the crown.)
Slowly turn the crown clockwise
(12 o’clock direction) to wind
the mainspring.
bCAUTION For models with a screw down crown, remember to screw the crown
in.
Generally speaking, the crown of the manual winding mechanical watch cannot be turned
further when it is wound up fully. However, the crown of the Cal. 9S64 and 9S63 can be turned
endlessly even after the watch is fully wound up. If you keep turning the crown, that gives no
effect to winding, but the watch is so designed as to make the winding a little tighter and not
to damage the watch. However, please refrain from excessive operation.
30 HOW TO USE
HOW TO USE (FOR CAL. 9S64, 9S63)
How to set the time
First click position
* The orientation and design of the display may vary depending on the model.
1Pull out the crown when the seconds
hand is at the 12 o’clock position.
(The seconds hand stops.)
Turn the crown to set the hour and
minute hands to the desired time.
2Push the crown back in to the normal
position in accordance with a time
signal. The watch starts operating.
Tips for more accurate time setting (For Cal. 9S63)
To ensure effective operation of the 9S63 mechanism, observe the following instructions
when you set the time.
1Pull out the crown to the first click when the seconds hand is at the 12 o’clock position.
(The seconds hand stops.)
2Turn the crown counterclockwise (6
o’clock direction) and stop when the
minute hand is about one fourth of
the way between the minute you
want to set and the next minute.
3Turn the crown clockwise (12 o’clock
direction) to return the minute hand
to the desired time.
4Gently push the crown back in to the
normal position.
31
HOW TO USE
HOW TO USE (FOR CAL. 9S64, 9S63)
English
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 9S61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 9S61 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seiko 9S61

Seiko 9S61 User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info