757443
11
Zoom out
Zoom in
Previous page
1/16
Next page
Normal
position
First click
position
Second click
position
3
Pull out the crown to the second click
when the seconds hand is at the
12 o’clock position. (The seconds
hand stops.)
Turn the crown counterclockwise
(6 o’clock direction) to advance the
hands until the desired date appears.
If the date changes, it means that the
watch is set in the morning. Turn the
crown further until the watch is set to
the current time.
4
Push the crown back into the normal
position. The watch starts operating.
Date adjustment at the end of the month
It is necessary to adjust the date after February (which has 28 days, 29 days in a leap year)
and a 30 day month.
Ex.To adjust the date in the a.m.
period on the first day of a month
following a 30-day month
“31” is displayed instead of “1”. Pull out the
crown to the first click. Turn the crown
counterclockwise (6 o’clock direction) to
set the date to “1”, and push the crown
back in to the normal position.
First click
position
bCAUTION
For models with a screw down crown, remember to screw the crown in.
Tips for more accurate time setting
To ensure effective operation of the Spring Drive mechanism, observe the following
instructions when you set the time.
1Before setting the time, make sure to wind the mainspring sufficiently.
(Ensure that the power reserve indicator is showing a full-wound state.)
2When starting to use a watch after it stops, wind the mainspring sufficiently. To set the
time after that, wait for approximately 30 seconds after the seconds hand starts moving,
then pull the crown out to the second click.
3The seconds hand will stop moving when the crown is pulled out to the second click. Do
not stop the movement of the seconds hand for longer than 30 minutes. If the stoppage
of the seconds hand movement exceeds 30 minutes, push the crown back in, and wait
for approximately 30 seconds after the seconds hand restarts moving, and then set the
time.
bCAUTION
For models with a screw down crown, remember to screw the crown in.
18 HOW TO USE
HOW TO USE
FUNCTIONS OF DIVER’S MODEL
Unidirectional rotating bezel
By using the rotating bezel, you can measure the elapsed time since the start of an
event or an activity such as diving.
This watch has a unidirectional rotating bezel. As the evaluation of the remaining air in your
cylinder is based on the information of the elapsed time of the dive, the rotating bezels for a
diver’s watch is designed to rotate only counterclockwise, so that the watch is prevented from
displaying the elapsed time shorter than it actually is.
bCAUTION Make sure that you check the correct remaining amount of air in your
cylinder before diving. Use the display of the elapsed time by the
rotating bezel only as a guide during diving.
How to use the rotating bezel
1At the start of the activity, for which you want to measure the elapsed time (for example,
when you start diving), rotate the bezel so that the mark on the bezel is aligned with
the minute hand.
2Read the graduation on the rotating bezel to which the minute hand is pointing.
Ex. When you start diving at 10:10.
Start of the dive After 15 minutes has elapsed
Align the mark
with the minute
hand
Rotating direction of the
bezel
Elapsed
time
Read the graduation on the
rotating bezel to which the
minute hand is pointing.
19
FUNCTIONS OF DIVER’S MODEL
English
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 9RA5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 9RA5 in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seiko 9RA5

Seiko 9RA5 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info