757421
6
Zoom out
Zoom in
Previous page
1/12
Next page
How to wind the mainspring
This is an automatic mechanical watch with a manual winding mechanism.
When the watch is worn on the wrist, the mainspring is wound automatically through normal wrist
movement. The watch can also be wound up by turning the crown.
To start the watch after it stops completely, wind it up either by turning the crown or swinging it from side
to side until the seconds hand starts moving. Then, set the time and date before putting the watch on
the wrist. To wind up the watch, unscrew the crown by turning it counterclockwise, and then, turn it
clockwise slowly. The watch cannot be wound by turning the crown counterclockwise. In this way, the
watch can be wound up fully. Furthermore, turning the crown further will not break the spring.
Once the watch is wound up fully, it operates for about 50 hours (8L35) or 55 hours (8L55).
EN 17
1
HOW TO USE
* If the watch is used without being wound up fully, gain or loss of time may result. To avoid this, wear the watch for
more than 10 hours a day. If the watch is used without being worn on the wrist, be sure to wind it up fully every day
at a fixed time.
* If you use a watch that has stopped with the mainspring unwound, winding the mainspring with the crown will not
start the watch immediately. That is because the mainspring torque or force is low at the beginning of its winding
due to the characteristics of mechanical watches. The seconds hand will start to move when a certain degree of
torque is reached after the mainspring has been wound up. However, swinging the watch from side to side to
forcibly turn the balance can start the watch sooner.
EN 18
1
HOW TO USE
How to set the time and date
The watch is provided with a date function and is so designed that the date changes once every
24 hours.
The date changes around 12 o’clock midnight. If AM/PM is not properly set, the date will change
at 12 o’clock noon.
bCAUTION
Do not amend the date when the watch is displaying between 8 PM and 2 AM.
Amending the date during this time period may cause problems such as the date failing
to change the next day.
EN 19
1
HOW TO USE
Pull out the crown to the
first click
3The date can be set by turning the crown clockwise.
Turn it until the previous day’s date appears.
Ex.) To display the date as “6,” then set this to “5.” Turn the crown to the right (clockwise) to set the
date.
1Unlock the crown.
* “Screw down crown” → P. 16
2Pull out the crown to the first
click.
EN 20
1
HOW TO USE
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 8L35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 8L35 in the language / languages: English as an attachment in your email.

The manual is 6,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seiko 8L35

Seiko 8L35 User Manual - German - 11 pages

Seiko 8L35 User Manual - Dutch - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info