757419
23
Zoom out
Zoom in
Previous page
1/27
Next page
English
English
44 45
Within 20 seconds after procedure 1. is completed and the date stops, start the
operation of procedure 2.
1.
Button B
1.
Press for 3
seconds.
2.
Press within
20 seconds
after the
date stops.
Button A
1.
Press for
3 seconds.
Do not pull the crown out.
1.
Press and hold Buttons A and B (for 3 seconds) at the
same time until the second hand stops pointing to the
13-second position.
The watch enters the preliminary position setting mode for date.
The date will start to move and stop at the preliminary position.
First, press Button B, and subsequently press Button A
while keeping holding down Button B so as to press both
of them successfully.
While the date is moving, the button cannot be operated.
2.
Within 20 seconds after the date stops, press Button
B to set the date to “1.”
Make sure that the numerical number “1” is located
at the center of the date window.
If “1” is already displayed in the date window, move on to
the procedure 3.
To advance
rapidly
Press and hold the button for longer than 2 seconds.
Press the button once again to stop.
To ne-tune
When the button is pressed intermittently, the hand
will slightly advance.
If the watch is left untouched for 20 seconds after the date stops, the watch automatically returns to
the TIME display mode. If this happens, restart the operation from procedure 1.
Button A
3.
Press for
2 seconds
Button A
5.
Press for
2 seconds
Button B
4.
Press
3. Press and hold Button A (for 2 seconds)
until the second hand stops pointing to the
55-second position.
The watch enters the preliminary position
setting mode for day of the week.
4.
Press Button B to set the day hand to point to
“S.”(Sunday)
Make sure that the day hand is set to point to “S.”
If the day hand is already pointing to “S”, move on to the
procedure 5.
The day hand rotates clockwise.
To advance
rapidly
Press and hold the button for longer than
2 seconds. Press the button once again to stop.
To ne-tune
When the button is pressed intermittently, the hand
will slightly advance.
5. Press and hold Button A (for 2 seconds)
until the second hand stops pointing to the
0-second position.
The watch enters the preliminary position
setting mode for hour and minute hands.
If the hour and minute hands are already indicating
the correct time, move on to the procedure 7.
23


Need help? Post your question in this forum.

Forumrules
1

Forum

seiko-8b63

Reset search

  • My seiko will not adjust for daylight savings time. Model 8B63 Submitted on 11-3-2024 at 20:27

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 8B63 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 8B63 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info