757419

Seiko 8B63 Manual

19
Zoom out
Zoom in
Previous page
1/27
Next page
English
English
36 37
When the watch is used continuously in conditions in which the watch may be
unable to receive a radio signal, it can be manually adjusted.
■HOW TO MANUALLY SET THE TIME
• When the watch is unable to receive a radio signal, it can move depending on
normal quartz movement (loss / gain: ±15 seconds per month on average).
• When adjusting the time, the date and day will be accordingly adjusted.
• When the watch receives a radio signal after manual adjustment of the time,
it displays the received time.
WHEN A RADIO SIGNAL CANNOT BE
RECEIVED
When a radio signal cannot be received, refer to the following pages:
• Not receivable within the radio signal reception range
Check that the time zone of the area where the watch is used is set.
Although the time zone is correctly selected, the time and date are misaligned.
→TROUBLESHOOTING: Reception of a radio signal. P.48
Since a radio signal cannot be received, the time and date became misaligned. In this
case, set the time and date manually.
→ HOW TO MANUALLY SET THE TIME P.37
*
For the radio signal reception ranges, refer to “RADIO SIGNAL RECEPTION RANGE
INDICATION.” P. 20
• When the watch is used outside the radio signal reception range
Select the time zone of the area where the watch is used.
→ HOW TO SELECT THE TIME ZONE P.11
Although the time zone is correctly selected, the time and date may not be correct. In
this case, set the time and date manually.
1.
3.
Button B
2.
for counter-
clockwise
movement
Button A
2.
for clockwise
movement
1. Pull out the crown to the second click.
➤
The Second hand moves to point to the
0-second position and the watch enters the
manual time setting mode.
2. Press Button A or B to set the time.
One minute
Advance
Press the button once and then release it.
Continuous
Advance
When the button is kept pressed for two seconds or longer, the
hand will start to move. Press the button again to stop.
※
Turning the crown will not move the hand.
0 1 2
※
When the watch enters the manual time
setting mode, the reception results will be
indicated as“ N,” since the reception results
data will be lost.
3.
Push the crown back to normal position.
➤
Operation has been completed.
The watch resumes its normal movement.
… 19 …


Need help? Post your question in this forum.

Forumrules
1

Forum

seiko-8b63

Reset search

  • My seiko will not adjust for daylight savings time. Model 8B63 Submitted on 11-3-2024 at 20:27

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 8B63 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 8B63 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info