757416

Seiko 7K32 Manual

33
Zoom out
Zoom in
Previous page
1/51
Next page
59
BAROMETER HAND POSITION ADJUSTMENT".
Check and adjust the Barometer hands “1” and “2” if necessary, following the procedures
below.
To check the barometer hand position
Pull out crown “1” to the first click, and
then press and hold button Bfor 2 to 3
seconds.
Barometer hands “1” and “2” and the
atmospheric pressure change indicator
move to indicate “1000hPa”, “0hPa”
and “0”, respectively, and stop, as
the alarm hands start turning. Then,
the barometer hands and the
atmospheric pressure change indicator
start to show the demonstration
movement. Check if they return to
“1000hPa”, “0hPa” and “0”, respec-
tively, after demonstration movement.
(By pushing back crown “1” in to the
normal position, the barometer hands
indicate the current atmospheric
pressure and the alarm hands indicate
the current time.)
h
P
a
7
0
0
1
0
0
0
9
5
0
9
0
0
8
5
0
7
5
0
8
0
0
6
5
0
6
0
0
5
0
0
5
5
0
1
0
5
0
h
P
a
7
0
0
1
0
0
0
9
5
0
9
0
0
8
5
0
7
5
0
8
0
0
6
5
0
6
0
0
5
0
0
5
5
0
1
0
5
0
01
2
3
4
5
9
6
8
7
×1hPa
Barometer hand 2 and
atmospheric pressure
change indicator
Barometer hand “2” indicates “0hPa”.
Barometer hand “1” indicates “1000hPa”.
Barometer hand 1
60
Barometer hand position adjustment
If the barometer hands and atmospheric pressure change indicator do not return to “1000hPa”, “0hPa” and “
0”, respectively, follow the procedure below to reset the hands.
(1) Pull out crown “1” all the way to the second click.
Note: The small second hand stops on the spot and the alarm hands stop, indicating the time when crown “1”
is pulled out to the second click.

     

(2) Press buttons Band Cto reset the barometer hands to the 12 o'clock position.
[Adjustment of barometer hand “2” position]
Barometer hand “2” and the atmospheric pressure change indicator move correspondingly with each other.
Press button Cto reset barometer hand “2” and the atmospheric pressure change indicator to “0hPa” and “
0”, respectively.
Notes:
With each press of the button, the barometer hand
moves 1/3 hPa.
As barometer hand “2” moves, the atmospheric
pressure change indicator moves correspondingly.
Therefore, if the barometer hand “2” is reset to
“0hPa”, the atmospheric pressure change indicator
is automatically reset to “0” even if it does not
indicate “0” exactly.
If the atmospheric pressure change indicator is
moved past “0” position toward “1”, the barometer
hand and atmospheric pressure change indicator
move and return to where they were.
In that case, repeat the procedure from step (1).
h
P
a
7
0
0
1
0
0
0
9
5
0
9
0
0
8
5
0
7
5
0
8
0
0
6
5
0
6
0
0
5
0
0
5
5
0
1
0
5
0
01
2
3
4
5
9
6
8
7
×1hPa
12 o'clock position
Button C
Pull out crown “1”
to the second click.
“0” position
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 7K32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 7K32 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info