757415
19
Zoom out
Zoom in
Previous page
1/22
Next page
012
Pull out the
crown to the
second click
Press the
button once
and then
release it
1Pull the crown to the second click.
The seconds hand stops on the spot.
* When the crown is a screw lock type, unlock it.
→ P.13
* Do not turn the crown. Turning the crown switches the
watch to the manual time setting mode, and not the
preliminary position alignment mode. → P.61
2Press the button once, then release.
The watch switches to the preliminary position
alignment mode for the date.
The seconds hand moves to the 13-second
position.
The date moves, and stops at the preliminary
position.
* During movement of the date, neither the button nor
the crown can be operated.
EN 68
7
TROUBLESHOOTING
Turn clockwise to
advance 1 step.
Turn counterclockwise
to go back 1 step.
Press the
button
once
3Turn the crown to move the date to “1”.
Make sure that the numerical number “1” is located
at the center of the date window.
* If “1” is shown, go to step 4.
Continuous
adjustment
Turn quickly for continuous
movement.
Turn once more to stop.
Fine
adjustment
Turn intermittently to advance the
date slowly.
4If the correct date is not shown, press
the button once.
The watch switches to the preliminary position
alignment mode for the hour and minute hands.
The seconds hand moves, and stops at the 0-second
position.
The hour and minute hands move, and stop at the
12 o’clock position.
* While the hour and minute hands are moving, the
button and crown cannot be operated.
* If the correct time is shown, go to step 5.
EN 69
7
TROUBLESHOOTING
012
Push the
crown
back in
Adjusting the time and date by receiving a radio signal
“How to conduct manual reception (Receive a radio signal manually)” → P.58
When the watch is unable to receive a radio signal, refer to
“How to manually set the time” → P.61
“How to manually set the date” → P.63
* When the crown is a screw lock type, lock it. → P.13
5When this operation is complete, press
the crown to return.
This ends the preliminary position alignment mode,
and the seconds hand, and hours and minute
hands start to move.
When the watch returns to the time display mode,
check if the time and date are correct.
If the time and date are not correct, manually set
them.
EN 70
7
TROUBLESHOOTING
Troubleshooting
At trouble Possible causes Solutions
Reference
Hand
Movement
The seconds hand moves
at two-second intervals.
The energy depletion forewarning
function is activated. (P.38)
If the seconds hand moves at two- or
five-second intervals while you wear
the watch everyday, the watch is in a
condition where it cannot acquire
sufficient light, for instance, the watch
is concealed under a long sleeve shirt.
Fully charge the watch so that the
seconds hand may move at one-second
intervals.
Be careful not to conceal the watch
under a sleeve, etc., while wearing it.
When taking off the watch, place it in as
bright a location as possible.
P.36
The seconds hand moves
at five-second intervals.
The stopped seconds
hand pointing to the
15-second position
started operating.
The power save function has been
activated. (P.39)
When the watch is not exposed to
adequate light for a certain period of
time, the power save function to limit
energy consumption is automatically
activated.
Wait until the current time is displayed.
No operation is needed. (This is not a
malfunction.)
-
EN 71
7
TROUBLESHOOTING
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 7B75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 7B75 in the language / languages: English as an attachment in your email.

The manual is 5,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info