757380

Seiko 6R64 Manual

5
Zoom out
Zoom in
Previous page
1/16
Next page
Power reserve indicator
• The power reserve indicator lets you know the winding state of the mainspring.
• Before removing the watch from your wrist, observe the power reserve indicator to check if the watch
has stored enough power to keep running until the next time you wear it. If necessary, wind the
mainspring. (To prevent the watch from stopping, wind the mainspring to store the excess power that
will allow the watch to run for extra time.)
Power reserve indicator
* The continuous operating time of the watch may vary depending on the conditions of your usage (such as the
number of hours you wear the watch or the extent of your movement while wearing it).
* In a case where you wear the watch for a short period of time each day, observe the power reserve indicator to
check the level of the remaining power. If necessary, manually wind the mainspring.
EN 13
1
HOW TO USE
■ How to read the power reserve indicator
•As shown in the diagram below, when the indicator is pointing near 45 or F on the scale, it is fully wound.
As the mainspring unwinds, the indicator will move toward 0 or E.
* The accuracy of a mechanical watch is affected by the winding amount of the mainspring. If the watch is used
for a long time when the winding amount is 20 hours or less, stable accuracy may not be obtained. Therefore,
it is recommended that the winding amount be between 20 hours and full winding when you use the watch.
* Once the mainspring is fully wound, it will slip if you wind it further, so there is no chance of the mainspring
breaking even if it is over wound.
* The indicator may move beyond 0 or E, but this is not a malfunction.
The Power
Reserve Indicator
The winding state
of the mainspring Fully wound Half wound Unwound
The number of
hours the watch
can run
Approximately 45 hours Approximately 20 hours The watch either stops or is
running down.
* Designs vary depending on the model. Refer to the above diagram to read the approximate continuous operating
time.
EN 14
1
HOW TO USE
How to set the time and date
■ How to set the time and date
To set both time and date, set the 24-hour hand and minute hand first, and then set the date and
the hour hand.
* To adjust the date only on a day such as the next day after the completion of a month that has less than 31 days
(February, April, June, September and November), please refer to “Date adjustment at the end of the month”
→ P.19.
First, set the 24-hour hand and the minute hand.
1Make sure that the watch is working.
* To carry out the procedure, please make sure that the watch is in working state. Please wind the mainspring
when the watch is not working.
Pull out the crown
to the second click
when the seconds
hand is pointing at
the 0 second
position.
2Pull out the crown to the second click
when the seconds hand is pointing at
the 0 second position. The seconds
hand stops moving.
* For models with screw down crown, please unlock the
crown before operating it.
EN 15
1
HOW TO USE
Set it in such a way that
the 24-hour hand and
the minute hand
advance clockwise
3For advancing the hands clockwise,
turn the crown in the direction of the
arrow and set the time of the 24-hour
hand and the minute hand.
In order to set the time accurately, turn the minute
hand 4 to 5 minutes ahead and then return it to the
correct time.
* As the hour hand moves together, it may point to a
different time from the one you wish to set, or the date
may change. Please set the minute hand and the 24-
hour hand first.
4Push the crown back in to the normal
position.
Thereby, the 24-hour hand, the minute hand and
the seconds hand will be in alignment.
* Time signal service is useful for second setting.
EN 16
1
HOW TO USE
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 6R64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 6R64 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seiko 6R64

Seiko 6R64 User Manual - German - 16 pages

Seiko 6R64 User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info