757345
7
Zoom out
Zoom in
Previous page
1/17
Next page
English
12
English
13
* Only the 24-hour and minute hands are to be set at this
stage. The hour hand is to be set later so it is not necessary
to adjust the hour hand yet, even if it is indicating the
wrong time.
* The date may be altered depending on the position of
the hour hand, however it should not cause any concern
since it can also be adjusted later.
* Set the minute hand behind the time and then slowly
advance it to the desired time.
SPRING DRIVE
1
4. Pull out the crown to the first click.
SPRING DRIVE
1
6. Push the crown back in upon completion of time
setting.
<Example>
To set the 24-hour hand to the
time in New York while setting the
hour/minute hands to indicate the
time in London.
When the time in London is
10:00 A.M., it is 5:00 A.M. in
New York.
Set the 24-hour hand to indicate
“5” on the 24-hour scale (the 2.5
o’clock position), while the minute
* The time difference adjustment
function serves only for a time
in a “different time zone area”
where the time difference from
the time in London is represented
in one-hour increments.
Tips for more accurate time setting
Keep in mind the following points in order to set the time more accurately.
1. Before setting the time, wind the mainspring sufficiently until the power reserve
indicator shows the fully-wound state.
2. When starting to use a watch after it stops, wind the mainspring sufficiently and
wait approximately 30 seconds after the second hand starts to move, then pull the
crown out to the second click.
3. Do not stop the second-hand movement for 30 minutes or longer while the crown is
at the second click position. If the stoppage of the second-hand movement exceeds
30 minutes, push the crown back in to restart the second hand, wait at least 30
seconds, and then carry out the time setting once again.
2. Turn the crown counterclockwise to set the 24-hour and
minute hands to the time in the “different time zone
area” you wish to set.
* Also, adjust the date at this point if necessary.
* The moment the date changes is midnight. When setting
the hour hand, be sure that AM/PM is set correctly.
* Turn the crown slowly, checking that the hour hand
moves in one-hour increments.
* When adjusting the hour hand, the other hands may
move slightly. However, this is not a malfunction.
3. Push the crown back in simultaneously with the time
signal.
* The setting of the 24-hour, minute and second hands
to the time in the “different time zone area” is now
completed.
5. Turn the crown to set the hour hand to the current hour.
(In this example, the current hour in London.)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 5R67 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 5R67 in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info