757344
7
Zoom out
Zoom in
Previous page
1/17
Next page
Tips for more accurate time setting
Take notice of the following points in order to set the time more accurately.
Before setting the time, wind the mainspring until the power reserve indicator shows a full-wound state.
When using a watch after it has stopped, wait approximately 30 seconds after the seconds hand starts
moving, and then pull the crown out to the second click.
Do not stop the seconds hand with the crown being at the second click position for thirty minutes or
longer. If the time the crown has been at the second click position and the seconds hand has been
stopped exceeds 30 minutes, push the crown back in to its original position, and let the seconds hand
move for 30 seconds or longer, then restart the time setting.
EN 20
3
5R65 (A model without a 24-hour hand)
Date adjustment at the end of the month
It is necessary to adjust the date at the end of February and 30-day months.
Ex.) To adjust the date in the A.M. period on the first day of a month following a 30-day month
The watch displays “31” instead of “1.” Pull out the crown to the first click.
Turn the crown counterclockwise to set the date to “1” and then push the crown back in to the normal
position.
* For models with screw down crown, please be sure to lock the crown after operating it.
Pull out the crown to the first
click
bCAUTION
Avoid amending the date when the watch is displaying between 9 PM and 1 AM. Doing
so may cause damage.
EN 21
3
5R65 (A model without a 24-hour hand)
How to set the time and date
How to set the time and date
To set both time and date, set the 24-hour hand and minute hand first, and then set the date and
the hour hand.
* To adjust the date only on a day such as the next day after the completion of a month that has less than 31 days
(February, April, June, September and November), please refer to “Date adjustment at the end of the month”
→ P. 26.
First, set the 24-hour hand and the minute hand.
1Make sure that the watch is working.
* To carry out the procedure, please make sure that the watch is in working state. Please wind the mainspring
when the watch is not working. “How to wind the mainspring by using crown (Hand winding)” → P. 14
Pull out the crown to
the second click when
the seconds hand is
pointing at the 0
second position.
2Pull out the crown to the second click
when the seconds hand is pointing at
the 0 second position. The seconds
hand stops moving.
* For models with screw down crown, please unlock the
crown before operating it.
EN 22
4
5R66 (A model with a 24-hour hand)
Set it in such a way that
the 24-hour hand and
the minute hand
advance clockwise
3For advancing the hands clockwise,
turn the crown in the direction of the
arrow and set the time of the 24-hour
hand and the minute hand.
From about 10 minutes before the desired time,
slowly advance and set the 24-hour hand and the
minute hand.
* As the hour hand moves together, it may point to a
different time from the one you wish to set, or the date
may change. Please set the minute hand and the 24-
hour hand first.
4Push the crown back in to the normal
position.
Thereby, the 24-hour hand, the minute hand and
the seconds hand will be in alignment.
* Time signal service is useful for second setting.
EN 23
4
5R66 (A model with a 24-hour hand)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 5R66 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 5R66 in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info