804505
5
Zoom out
Zoom in
Previous page
1/86
Next page
WARNING!
The remote control contains a Li-ion battery. Follow all instructions in this document and on the device
label. Otherwise you risk personal injury or property damage due to fire, explosion, electric shock, and
other dangers.
Not user serviceable. To replace the battery, contact Segway (page 21).
Only use a Ninebot or Segway approved charge cable. Please use it properly within the rated range.
Always use a power supply that meets SELV and IEC60950-1 Limited Power Source requirements.
06 07
4 Assembling Your Segway S-PLUS
Ensure the cables are firmly connected.
1. Slide the steering bar onto to the mounting bracket. Route the cable through the hole.
2. Align the tab on one connector with the notch on the other. Connect the cables.
3. Install the two M5 screws. Tighten securely with the included hex wrench.
4. Power on the unit for self check to ensure the cables are connected properly. The Segway S-PLUS
beeps if the cable is not installed correctly. Press the cap onto the steering bar until it snaps in place.
1234
Remote Control
When using the remote control, do not shield the antenna area; do not cover the antenna area with any part of your
body. Turn off the remote control and stow it in the storage compartment when not in use. Please note that the remote
control cannot control the movement of your Segway S-PLUS when in Riding Mode.
With the App, you can customize what this button does. By default it enables/disables Lock Mode.
When a camera is detected, short press the Camera Mode button to take a photo. Long press
(1 sec) to start recording video, and then short press to stop recording. The button blinks blue
while recording.
Camera
Follow
Home
Power switch. Short press the Home button to power on the remote control. Long press to turn it off.
The remote control will turn off when idle for two minutes.
Home mode. Short press the Home button to tell your Segway S-PLUS to hold position.
Remote control battery indicator light.
> 20% power Blue Charging Red, Breathing
< 20% power Red Fully Charged Blue
< 10% power Red, Blinking
< 5% power The remote control powers off automatically.
1)
2)
3)
Move the joystick to turn on Remote Control Mode. Use the App to adjust the maximum
vehicle speed.
Joystick 1)
1)
2)
Short press the Follow Mode button to enable/disable Follow Mode. Use the App to adjust
the following speed and distance (from vehicle to controller).
Long press (1 sec) the Follow Mode Button to use the joystick to control the pitch and yaw
position of the attached camera.
1)
2)
Antenna Area
Camera Mode
(Customizable)
Follow Mode
Joystick
Home
Refer to the camera instructions for more information.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Segway S-Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Segway S-Plus in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info