Manual Segway Ninebot KickScooter F25I (page 6 of 37) (English, German, Dutch, French, Italian, Polish, Spanish)

804484

Zoom out

Zoom in

1/37

To ensure safe riding, day to day care and regular maintenance are essential. You, the owner, have control and knowledge of

how often you use your scooter, how hard you use it and where you use it. It is the owner's responsibility to perform regular

checks and bring your scooter to authorized service center for inspection and service. Please refer to the maintenance

schedule below.

Note: This maintenance schedule charges a service fee.

Recommended Maintenance Schedule

Item Component

Mainframe parts Use a soft, wet cloth to wipe the mainframe clean.

Tire pressure F25I: Inflate tires to 40–45 psi.

F40I: Inflate tires to 50–55 psi.

Note: Remember to screw the valve cap after inflating!

Tire wear

Screws on the

stem top

Mainframe

maintenance

Screws on the

folding

mechanism

Check if the tires are cracked, deformed, or

significantly worn.

Tighten the six screws fixed with the handlebar and the

stem. The suggested torque is 5.5±0.5 N·m.

Tighten the screw on the throttle. The suggested

torque is 3.5±0.1 N·m.

Tighten the screws on the brake lever. The suggested

torque is 5.5±0.1 N·m.

Tighten the screws on the stem top. The suggested

torque is 10±0.5 N·m.

Tighten the two screws fixed with the front fork and the

folding mechanism. The suggested torque is 10±1 N·m.

If the stem gets shaky when riding, tighen the screw on

the folding mechanism when the scooter is in folded

state. The suggested torque is 12.5±1 N·m.

Brake disc

assembly

Tighten the screws on the brake disc assembly. The

suggested torque is 7.7±0.2 N·m.

Maintenance method Every 3

months

Every 6

months or

every 310

miles (500

km)

After 2 years or

the total

mileage > 3107

miles (5000

km)

√√

√√√

Item Component

Hub motor

Rear wheel

maintenance

Brake

adjustment

To accelerate and decelerate, check if the hub motor is stalled

or has abnormal sounds.

Check if the rear wheel is stalled or gets shaky, or the axis shaft

is unbalanced.

If the brake is too tight/loose, use the 4 mm Allen key to loosen

the screw on the caliper. Then slightly adjust the brake line

(decrease/increase the exposed length), and tighten the

screw again.

Function

Inspection

Maintenance method Every 3

months

Every 6

months or

every 310

miles (500

km)

After 2 years or

the total

mileage > 3107

miles (5000

km)

√√

Brake rotor

Taillight Squeeze the brake lever, the tail light works normally.

Spin the wheels, the caliper should be aligned with the rotor and

they shouldn't rub on the brake pads.

Headlight Check the headlight and see if it lights brightly.

Direction

indicators

Toggle the direction indicator button to the left/right

respectively, check if the direction indicators on the left/right

side flash normally.

Dashboard

Power on the scooter, the dashboard works properly.Switch

between the speed modes, the dashboard will display the

corresponding speed mode icon.

Bell Ring the bell, the sound is loud.

Buzzer Power on/off the scooter, the buzzer sound is normal.

Throttle

Fault

detection

Press and hold the throttle then release it, checking for

acceleration and deceleration.

Note: Release it, check if the throttle will back to the position.

After connecting with the Segway-Ninebot app:

1) Update the firmware to the latest version.

2) Check if the notification of the corresponding error code and

possible causes will prompt when the scooter detects an error.

√√

01 02 03 04 05 06 07 08 09 10 11 12

13 14 15 16 17 18 19 20 21 22 23 24 25 26

27 28 29 30 31 32 33 34 35 36 37 38 39 40

41 42 43 44 45 46 47 48 49 50 51 52 53 54

55 56 57 58 59 60 61 62 63 64 65 66 67 68

69 70 71

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Segway Ninebot KickScooter F25I in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Segway Ninebot KickScooter F25I Manual

Product: