491168
46
Zoom out
Zoom in
Previous page
1/59
Next page
Trouble shooting
Before contrast the service technician,perform the following simple checks.
If any program still persists,unplug the LCD TV and calling for serving.
PROBLEM
POSSIBLE SOLUTION
No sound and picture
-Check whether the main plug has been connected to a
wall outlet.
-Check whether you have pressed the POWER button
on the front of TV set.
-Check the picture contrast and brightness settings.
Normal picture but no
sound
-Check the volume.
-Sound muted? Press the MUTE button.
-Try another channel,the problem may be with the
broadcast.
-Are the audio cables installed properly?
The remote control
does not work
-Check to see if there any object between the product
and remote control causing obstruction.
-
Are batteries installed with correct polarity(+ to +,- to -)
-Correct remote operating mode set: TV,VCR etc.?
-Install new batteries
Power is suddenly
turned off
-Is the sleep timer set?
-Check the power control settings.Power interrupted.
-No broadcast on station tuned with auto activated.
Picture appears slowly
after switching on
-This is normal,the image is muted during the product
startup process.Please contact your service center,if
the picture has not appeared after five minutes.
No or poor colour or
poor picture
-Adjust the colour in menu option.
-Keep a sufficient distance between the product and
theVCR.
-Try another channel,the problem may be with the
broadcast.
-Are the VIDEO cables installed properly?
-Activate the any function to restore the brightness of
picture.
Horizontal/vertical
bars or picture shaking
-Check for local interference such as an electrical
appliance or power tool.
Poor reception on
some channels
-Station or cable product experiencing problems.
Tune to another station.
-Station signal is weak,reorient antenna to receive
weaker station.
-Check for sources of possible interference.
Lines or streaks in
pictures
-Check the antenna(Change the direction of the
antenna).
-Adjust balance in menu option.
No output from one
of the speakes
The signal is out of
-Adjust resolution,horizontal frequency,or vertical
frequency.
-Check it whether the signal cable is connected or
loose.
-Check the input source.
range
Vertical bar or stripe
-Work the auto configure or adjust clock,phase,or H/V
position.
Horizontal Noise&
Incorrect position.
Screen colour is
unstable or single
-Check the signal cable.
colour.
-
Reinstall the PC video card.
NOTE:There is a problem in VGA mode(Only VGA mode applied).
on back ground&
20
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SEG Wien at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SEG Wien in the language / languages: English, German as an attachment in your email.

The manual is 7,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info