24
Utah 81cm LED BLU-TV
ATTACHING THE STAND
TO YOUR TV
Follow the instructions below to attach the TV stand
Waste Electrical Recycling
Correct disposal of Product
This sign indicates that this product may
not be disposed of with your regular
household waste. The recycling and sepa-
rate collection of such products is your
responsibility. Please drop off the above
mentioned waste at a designated place for
recycling waste electrical and electronic
equipment. If you do not know where to drop off your
waste equipment for recycling, please contact your local
city ofce or household waste collection service.
The crossed out wheeled dust bin symbol
indicates that batteries and /or accumula-
tors must be collected and disposed of
separately from household waste.
If the battery or accumulator contains more
than the specied values of lead (Pb), mer-
cury (Hg), and/or cadmium (Cd) dened in
the Battery Directive (2006/66/EC), then the
chemicals Hg Cd Pb symbols for lead(Pb),
mercury (Hg) and/or cadmium (Cd) will ap-
pear below the crossed out wheeled dust bin
symbol.
By participating in separate collection of batteries, you
will help to assure the proper disposal of products and
batteries thus help to prevent potential negative conse-
quences for the environment and human health.
For more detailed information about the collection and
recycling programmes available in your country, please
contact your local city ofce or the shop where you pur-
chased this product.
This appliance complies with European
Safety and Electrical directives. It fullls
the following EU regulations:
EN55013:2001+A1:2003+A2:2006
EN55020: 2007
EN61000-3-2: 2006 EN61000-3-3:1995+A1:2001+A2:2005
EN55022:2006(CLASS-A)
EN55024:1998+A1:2001+A2:2003
Manufacturer:
Schmid Electronics GmbH
In Dürrfeldslach 3
D-66780 Rehlingen-Siersburg (Germany)
Fon: +49(0)6835 92350-0
Fax: +49(0)6835 92350-500
1. Open the box and make sure all necessary parts are in
the box. The package contains:
A - TV Unit B - Base of Stand C-Screws
2. Cover an stable surface with a soft cloth. Place the TV
Unit facedown on the cloth. Prepare to put the stand
in.
3. Take off the screw from the TV stand socket.
4. Then t the stand into the TV stand socket.
5. Keep the stand by four screws
Four screws(4×20 BTHCH)
4