491132
79
Zoom out
Zoom in
Previous page
1/96
Next page
31
5. Additional Information
5.1 Problem Shooting
You might meet abnormal working for various reasons, check the
following which may help you.
Problem Possible causes What to do
LED on the front panel fail to light
up/is not lit.
Mains supply cable is not connected.
Check if the mains supply cable is plugged into the power
socket.
No picture or sound. Satellite dish is not aiming to satellite
accurately. No signal or weak signal.
The LNB is faulty. The cable is faulty.
Adjust the dish. Check the signal strength indicator in one of
the channel search submenus. Check the cable
connections, LNB and other equipment connected to LNB &
receiver, or adjust dish. Replace the LNB. Replace the cable.
Bad picture/blocking error. Satellite dish is not aiming to the
satellite accurately Signal too strong.
Satellite dish is too small. LNB noise
factor too high. The LNB is faulty.
Adjust the dish. Connect a attenuator to LNB input. Change
to a larger dish. Change LNB with lower noise factor.
Replace the LNB.
No startup menu on screen after
turning on STB for the first time.
The system is connected by SCART
cables and the TV is not in AV/EXT
mode.
Switch the TV to the appropriate AV input.
The remote control is not working. Battery exhausted. Remote control is
not aimed correctly STB is in standby
mode.
Change the batteries (both). Aim the remote control at the
STB. Check that nothing blocks the front panel. Check if LED
indicator on the front panel is showing the time, press the
power button to switch off standby mode.
You have forgotten your
password.
Contact the dealer or Service Provider. They will help you set
it up again.
Poor picture quality or Less
channels in scanning.
Low LNB power or signal loss in cable. Change the LNB power to 14V/19V in Antenna setup menu.
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SEG SB 1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SEG SB 1200 in the language / languages: English, German as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info