Manual SEG RR 1103 (page 20 of 57) (English, German, French, Italian)

491148

Zoom out

Zoom in

1/57

Power Supply

Using the D C p o wer supply

The mains power supply can be used to save the batteries. Make sure that the unit is NO T plugged into the

wall outlet before inserting the batteries.

Batteries (not included)

O pen the battery compartment and insert 6 R14 batteries carefully observing the "+" and "-" polarity

marking inside the c ompartment.

Important:

When replacing the batteries, make sure you dispose of the old batteries in accordance with regulations in

your area. They should be disposed of in a location specifically designated for that purpose so they can be

recycled safely a nd without posing any risk for the environment. D o not burn batteries.

NOTE:

Incorrect use of the batteries may result in electrolyte leakage having a corrosive effect in the

compartment.

Do not mix different types of batteries: do not use a lkaline batteries with saline batteries, for example.

Do not mix old batteries with new ones. U se batteries of the same type recommended by the manufacturer.

If the unit is not to be used for an extended period of time, remove the b atteries as damage may occur due to

battery leakage.

Using the A C s upply

Make sure that the voltage indicated on the manufacturer's nameplate in the battery compartment

corresponds to the voltage supply in your home. If this is not the case, DO NO T use this appliance. Seek

qualified advice.

C onnect the electrical power cable to the unit, then plug it into the wall outlet. The wall outlet must be

located near the product and be e asily a ccessible.

To turn power to the a pparatus off, unplug the power supply cable from the wall outlet.

To protect the unit during thunderstorms, unplug the power supply cable from the wall outlet.

Connecting to the Power Supply: do not use the device if the device or its cables present visible damage.

Connect the device only to the voltage indicated on the corresponding rating label on the product. Never connect the

device to a different voltage. Connecting to other power source may damage the unit. Connect the device to

grounded power outlets that comply with the corresponding safety standards only. Do not bend or squeeze the

cables.

WARNING: Inside the device there is dangerous voltage. Never open the housing of the device: there is risk of

personal injury by electric shock.

In order to completely disconnect the device from the mains, the power plug must be pulled out from the wall

outlet. Make sure that you can remove the power plug at any time. Always pull the power cord from the plug and

never from the cable itself. Electric storms may damage any electric equipment; therefore disconnect the power

plug from the wall outlet during a thunderstorm. It is also recommended to disconnect the device from the mains

and to remove any batteries when you are intending not to use the device for a longer time.

• Batteries: Keep batteries away from children.

Always replace all the batteries at the same time (never mix old and new batteries), use batteries of the same type.

Never use different types of batteries together. Do not short-circuit any batteries. Keep batteries away from any heat

sources (direct sun radiation, fire etc.). There is risk of explosion when misusing the batteries.

• To use the appliance with batteries, disconnect the AC power cord from it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of SEG RR 1103 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

SEG RR 1103 Manual

Product: